Alpine 68-09359Z83-B Manual Do Utilizador

Página de 48
33
-EN
 
You can change the unit, (cm or inch) of time correction.
CM (Initial setting) 
 INCH
MX (Media Xpander) makes vocals or instruments sound distinct 
regardless of the music source. The FM radio, CD, USB memory and 
iPhone/iPod, will be able to reproduce the music clearly even in cars 
with a lot of road noise.
Changing the source to which you want to apply Media 
Xpander.
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and produces 
well balanced sound at all frequencies.
CD (MX level 1 to 3):
CD mode processes a large amount of data during playback. 
MX takes advantage of this large data quantity to reproduce a 
more clear, clean output.
CMPM/SAT (MX level 1 to 3):
This corrects information that was lost at the time of 
compression. This reproduces a well-balanced sound close to 
the original.
DVD (MX level 1 to 3):
A DVD or Video CD contains a large quantity of data such as 
music clip. MX uses this data to reproduce the sound 
accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that 
corresponds to the media connected.
• The initial setting of MX is different depending on the source.
• Each music source, such as FM radio, CD, and MP3/WMA/AAC can 
have its own MX setting.
• On discs with both MP3/WMA/AAC and CD-DA, when the source 
changes from “MP3/WMA/AAC to CD-DA” or “CD-DA to 
 
MP3/WMA/AAC”, MX-mode switching may delay playback slightly.
• Setting to Non Effect sets MX mode of each music source to OFF.
• This function is inoperable when DEFEAT is set to ON.
• There is no MX mode for AM radio.
• If an audio processor with the MX function (PXA-H701, etc.) is 
connected, its own MX processing is applied to the music source. 
Since the processor MX settings may not match the head unit, the 
audio processor needs to be adjusted. For details, refer to the 
Owner’s Manual of the audio processor.
• “CMPM” is applied for MP3/WMA/AAC and iPhone/iPod.
• “SAT” is applied for XM radio and SIRIUS radio.
Setting the Time Correction Unit (TCR 
Parameter)
Setting the MX Level