Alvarez N/A Manual Do Utilizador

The horn assembly is shown above with 

the high frequency driver circled. Four 

screws need to be removed from the 

driver using the 3mm allen wrench. 

Keep the four screws in a safe place. 

The diaphragm and plate adapter are 

easily removed from the horn assembly. 

Notice the terminal locations in relation 

to the indents of the high frequency 

driver (circled above).  

Follow steps 1-5 of the high frequency 

driver replacement instructions, as the 

horn will need to be removed in order to 

access the diaphragm.

At the present time (January 2007), 

diaphragms are not currently available, 

so you will have to replace the complete 

driver following the previous section 

(pages 9-12). If you have received a 

diaphragm, please follow the steps 

below.

1

1

22

33

44

This is what the plate adapter and 

diaphragm look like after they have 

been removed from the horn assembly. 

The diaphragm is separated from the 

plate adapter simply by pushing down 

on the terminals.