QSC Audio MH-1063 Manual Do Utilizador

180 - 15k (-6dB, full space)

90° horizontal X +20 to -30° vertical (50° total, adjustable mount provides for vertical plane adjustments. 
The horizontal plane can be adjusted by altering mounting position on the low frequency enclosure before 
tightening bolts. 

 9 dB  (400 to 16k Hertz average)

8 (400 to 16k Hertz average)

[Tri-amp mode]  Mid Freq. 135.5 dB SPL calculated peak, 1m, full space
[Tri-amp mode]  High Freq. 133 dB SPL calculated peak, 1m, full space
[Bi-amp mode] 135.5 dB SPL calculated peak, 1m ,full space

[Bi-amp mode] 8 ohms nominal
6.4 ohms minimum at 1500 Hertz
91 ohms maximum at 150 Hertz

[Tri-amp mode]  Mid Freq. 275 W (AES method, 2 hrs.)
[Tri-amp ode]  High Freq. 80 W (AES method, 2 hrs.)
[Bi-amp mode] 250 W (IEC method, 8 hrs.)

[Tri-amp mode]  Mid Freq. 105 dB SPL, 1 watt, 1 meter
[Tri-amp mode]  High Freq. 108 dB SPL, 1 watt, 1 meter
[Bi-amp mode] 135.5 dB SPL, 1 watt, 1 meter

[Tri-amp mode] 250 Hertz or higher, 24dB/octave and 1.7k Hertz, 24dB/octave
[Bi-amp mode] 250 Hertz or higher, 24dB/octave

1.7k Hertz, 18 dB/octave electrical slope, HF driver power limiting circuit (never disrupts continuity).  Swit-
chable operation between Bi-Amp and Tri-amp operation.  Tri-amp setting removes crossover circuit from 
signal, leaving power limiter and DC blocking capacitors.

Barrier strip screw terminals accept up to #10 AWG stranded wire.  Four terminals, two HF input and two 
MF input (for Tri-amp mode operation).

MF:  10" high efficiency midrange, phase-ring loaded.
HF:   1.5" (38mm) exit, 3" (76mm) titanium diaphragm compression driver.

Attaches to top of the low frequency cabinet using three 5/16”-18 x 3/4” long bolts. 

39” high x 30” wide x 20” deep (991 x 762 x 508mm)

85 lb. (39 kg) net