Philips HTL5145B Manual Do Utilizador

12 EN

Apply factory settings

You can reset this product to the default 

settings programmed at the factory.

1 

In any source mode, on the remote control 

press Volume -, BASS -, and TREBLE - in 

sequence within three seconds.

 

»

When the factory settings restore is 

complete, the product automatically 

switches off and restarts.

5  Update software

To get the best features and support, update 

your product with the latest software. 

Check software version

In HDMI ARC source, on the remote control 

press TREBLE -, BASS -, and Volume - in 

sequence.

Update software via USB
1 

Check the latest software version on 

www.philips.com/support.

•  Search for your model and click on 

"Software and drivers".

2 

Download the software into a USB storage 

device.
a 

Unzip the download if zipped, and 

make sure that the unzipped file is

named "HTL5145.BIN".

b 

Put the "HTL5145.BIN" file in the

root directory.

3 

Connect the USB storage device to the 

 (USB) connector on this product.

4 

Switch this product to HDMI ARC source.

5 

On the remote control, within six seconds 

press   twice then Volume + once, and 

then hold down SURROUND ON.

 

»

"UPGRADE" (upgrade) blinks on the 

display panel.

6 

Press   to start the upgrade. 

 

»

Then "UPGRADE" (upgrade) is 

displayed on the display panel.

7 

Wait until the upgrade is completed.

 

»

If the upgrade is complete, this product 

automatically turns off and on again.