Novatel DL-V3 Manual Do Utilizador

18. Choose 115200 in the Bits per second: field.

19. Click OK.

20. Switch the null-modem cable connection on the DL-V3 from the COM2 port to the COM1 port.

21. Re-connect HyperTerminal and type the following commands to COM1:

• exit

 Type YES when asked to reboot or reload the system. For example, after you see: 

reload\r

• yes 

22. Switch the null-modem cable connection on the DL-V3 from the COM1 port to the COM2 port

23. Type RESET on COM2, or push and hold the power button on the DL-V3 and wait for the LEDs 

to indicate that the unit is powering off before releasing the power button, or physically remove 
power from the DL-V3. This step restores COM1 and COM3 by resetting the unit.

This concludes the Ethernet configuration via Serial Command Mode. Next, see the Lantronix Port 
Redirector Software section starting on Page 185 to configure Lantronix Port-Redirector software to 
configure a Lantronix virtual serial port in Windows XP.

115200