Philips 22PFL4208H/K/T Manual Do Utilizador
EN 24
Do not overload the USB port. If you
connect a USB hard drive device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
connect a USB hard drive device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
Note:
Make sure that the TV and the USB
hard drive are switched off.
hard drive are switched off.
While you are formatting the USB hard
drive, do not connect other USB
devices to the TV.
drive, do not connect other USB
devices to the TV.
1. Connect the USB hard drive directly to
the TV, or if you intend to connect other
USB devices in future, connect the USB hard
drive through a USB hub.
2. Switch on the TV and the USB hard drive,
if it has an external power source.
the TV, or if you intend to connect other
USB devices in future, connect the USB hard
drive through a USB hub.
2. Switch on the TV and the USB hard drive,
if it has an external power source.
3. Switch to a digital TV channel.
4. Press to start formatting the USB hard
drive.
5. Follow the onscreen instructions to
complete the formatting process.
Warning: The formatting process may take
some time. Do not switch off the TV or
disconnect the USB hard drive until this
process is complete.
4. Press to start formatting the USB hard
drive.
5. Follow the onscreen instructions to
complete the formatting process.
Warning: The formatting process may take
some time. Do not switch off the TV or
disconnect the USB hard drive until this
process is complete.
Start recording
One-touch recording
You can record the programme you are
currently watching with a single button.
You can record the programme you are
currently watching with a single button.
1. While you watch TV, press .
Recording starts immediately. A pop-up
window is displayed, indicating the end time
of the programme.
Recording starts immediately. A pop-up
window is displayed, indicating the end time
of the programme.
2. Optional: Use the Navigation buttons to
mark the end time of the recording.
mark the end time of the recording.
3. Select [Confirm], then press OK.
4. To stop recording, press .
Note:
4. To stop recording, press .
Note:
While recording, you cannot switch TV
channels or pause a TV broadcast.
channels or pause a TV broadcast.
If TV guide information is not available,
a default time of 30 minutes is set for
recording. You can change this if
needed.
a default time of 30 minutes is set for
recording. You can change this if
needed.
Schedule recordings
View programme information
Depending on the status of a programme,
you can start watching it or schedule to
record the programme.
1. Press .
Depending on the status of a programme,
you can start watching it or schedule to
record the programme.
1. Press .
2. Select [TV guide].
3. Select a channel and programme, then
3. Select a channel and programme, then
press OK.
The programme information is displayed.
The programme information is displayed.
Note: If you schedule recordings while you
are away, make sure that you leave the TV in
standby and keep the USB hard drive
switched on.
are away, make sure that you leave the TV in
standby and keep the USB hard drive
switched on.