ONKYO TX-NR1007 Manual Do Utilizador

50

If you connect to a COMPONENT VIDEO IN, you must 
assign it to an input selector. For example, if you connect 
your DVD/BD player to COMPONENT VIDEO IN 2, 
you should assign it to the DVD/BD input selector.

If you’ve connected your TV to the AV receiver with a 
component video cable, you can set the AV receiver so 
that composite video and S-Video sources are 
upconverted* and output by the COMPONENT VIDEO 
MONITOR OUT

*1

. You can set this for each input 

selector by selecting the “- - - - -” option.

*1 Only when “Monitor Out” setting is set to “Analog”. 

Notes:
• For composite video and S-Video upconversion for 

the COMPONENT VIDEO MONITOR OUT, the 
“Monitor Out” setting must be set to “Analog” (see 
page 47), and the “Component Video Input” setting 
must be set to “- - - - -”. See page 27 for more 
information on video signal flow and upconversion.

• If not connected to the same output you have selected 

in the “Monitor Out” setting, the “Monitor Out” 
setting will be automatically switched to “Analog” 
(see page 47).

• If you connect an input component (such as UP-A1 

Dock that seated iPod) to the UNIVERSAL PORT jack, 
you cannot assign any input to PORT selector.

• This procedure can also be performed on the AV 

receiver by using its [SETUP] button, arrow buttons, 
and [ENTER] button.

DVD/BD

IN1

VCR/DVR

- - - - -

CBL/SAT

IN2

GAME

IN3

AUX

- - - - -

TV/TAPE

- - - - -

TUNER

- - - - -  (Fixed)

CD

- - - - -

PHONO

- - - - -

PORT

- - - - -

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “1. Input/Output 
Assign”, and then press 
[ENTER].
The “Input/Output Assign” menu 
appears.

Composite video, S-Video

Composite video, S-Video

Component video

Component video

q]/[w] but-

tons to select “3. Component 
Video Input”, and then press 
[ENTER].
The “Component Video Input” menu 
appears.

q]/[w] but-

e]/[r] buttons to select:

IN1:  Select if the video component 

is connected to COMPO-
NENT VIDEO IN 1.

IN2:  Select if the video component 

is connected to COMPO-
NENT VIDEO IN 2.

IN3:  Select if the video component 

is connected to COMPO-
NENT VIDEO IN 3.

- - - - -:  Select if you are using the 

HDMI outputs, rather than 
the COMPONENT VIDEO 
OUT, for the output from 
composite video, S-Video, 
and component video 
sources.

Press the [SETUP] button.
The setup menu closes.