Toshiba 40CV550A Manual Do Utilizador

Connecting your TV

HDMI (type A connector)-to-DVI adapter cable

For proper operation, the length of an HDMI-to-DVI adapter
cable should not exceed 3m. The recommended length is 2m.

Standard analog audio cables

An HDMI-to-DVI adapter cable transfers only video.
Separate analog audio cables are required.

Note:

HDMI, the HDMI logo, and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing, LLC.

Connecting a computer

An analog RGB (15 pin) computer cable can be connected.

Connect a PC cable from the computer to the

RGB/PC

terminal on the back of the TV.

The following signals can be displayed:

VGA: VESA 640 x 480 @ 60/72/75 Hz
SVGA: VESA 800 x 600 @ 60/72/75 Hz
XGA: VESA 1024 x 768 @ 60/70/75 Hz
W-XGA: VESA 1280 x 768 @ 60/75 Hz
W-XGA: VESA 1360 x 768 @ 60 Hz
S-XGA: VESA 1280 x 1024 @ 60/75 Hz (Compressed)

However, these signal formats are converted to match the
number of pixels of the LCD panel.

Therefore, the TV may not display small text properly.

If you connect this unit to your PC, the compressed image is
displayed in S-XGA mode, therefore the picture quality may
deteriorate and characters may not be read.

•

Connecting an HDMI device

One HDMI cable (type A connector)

For proper operation, it is recommended that you use a short
HDMI cable.
HDMI cable transfers both video and audio.

Note:

It is possible that some HDMI device may not operate

properly with this TV.

Connecting a DVI device

One HDMI (type A connector)-to-DVI adapter cable and
audio cables.

•