Kicker cx600.5 Manual Do Utilizador

Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items 
behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open 
ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill 
four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er.

Authorized KICKER Dealer:

Purchase Date:

Serial Number:

RMS Power, AMP1 and AMP2
@ 14.4V, 4

 stereo,  1% THD+N

@ 14.4V, 2

 stereo,  1% THD+N

@ 14.4V, 4

 mono,  1% THD+N

40W x 4
75W x 4
150W x 2

RMS Power, SUB channel
@ 14.4V, 2

 mono,  1.5 % THD+N

@ 14.4V, 4

 mono,  1.5 % THD+N

300 x 1
150 x 1

Length | in [mm]

14 [360]

Height | in [mm]

2-3/8 [60]

Width | in [mm]

7-3/16 [180]

Frequency Response ± 1dB

AMPS 1-2: 10Hz–20kHz
SUB: 25Hz–200Hz

Signal-to-noise Ratio

AMPS 1-2: >95dB, A-weighted, re: rated power
SUB: >90dB, A-weighted, re: rated power

Input Sensitivity

Low Level: 125mV–5V
High Level: 250mV–10V

Electronic Crossover

AMPS 1-2: HI/OFF [bypass], 50–200Hz, 12dB/octave; 
SUB: Variable low-pass,  50–200Hz, 24dB/octave

Bass Boost

Variable 0–12dB @ 40Hz

Subsonic Filter

24dB/Octave, Fixed @ 25Hz

Remote Bass:

Yes [sold separately]

Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use 
genuine KICKER accessories and wiring. 

2012 CX 5-Channel Amp Rev F.indd   2

2012 CX 5-Channel Amp Rev F.indd   2

6/22/2012   3:08:47 PM

6/22/2012   3:08:47 PM