Kenwood KAC-M645 Manual Do Utilizador
English
3
Installation
2 CAUTION
• Do not install in the below locations;
(Unstable location, In a location that interferes
with driving, In a location that gets wet, In a dusty
location, In a place that gets hot, In a place that gets
direct sunlight, In a location that gets hit by hot air)
with driving, In a location that gets wet, In a dusty
location, In a place that gets hot, In a place that gets
direct sunlight, In a location that gets hit by hot air)
• Do not install the unit under the carpet. Otherwise
heat build-up occurs and the unit may be damaged.
• Install this unit in a location which allows heat to
easily dissipate.
Once installed, do not place any object on top of the
unit.
Once installed, do not place any object on top of the
unit.
• The surface temperature of the amplifier will become
hot during use. Install the amplifier in a place
where people, resins, and other substances that are
sensitive to heat will not come into contact with it.
where people, resins, and other substances that are
sensitive to heat will not come into contact with it.
• This unit has cooling fan to decrease the internal
temperature. Do not mount the unit in a place where
the cooling fan and ducts of the unit are blocked.
Blocking these openings will inhibit the cooling of
the internal temperature and result in malfunction.
the cooling fan and ducts of the unit are blocked.
Blocking these openings will inhibit the cooling of
the internal temperature and result in malfunction.
• When making a hole under a seat, inside the trunk,
or somewhere else in the vehicle, check that there
is nothing hazardous on the opposite side such as a
gasoline tank, brake pipe, or wiring harness, and be
careful not to cause scratches or other damage.
is nothing hazardous on the opposite side such as a
gasoline tank, brake pipe, or wiring harness, and be
careful not to cause scratches or other damage.
• Do not install near the dashboard, rear tray, or air bag
safety parts.
• The installation to the vehicle should securely fasten
the unit to a place in which it will not obstruct
driving. If the unit comes off due to a shock and hits
a person or safety part, it may cause injury or an
accident.
driving. If the unit comes off due to a shock and hits
a person or safety part, it may cause injury or an
accident.
• After installing the unit, check to make sure that
electrical equipment such as the brake lamps,
turn signal lamps and windshield wipers operate
normally.
turn signal lamps and windshield wipers operate
normally.
Installation board, etc.
(thickness : 15 mm or more)
(thickness : 15 mm or more)
Self-tapping screw
(ø4 × 16 mm)
(ø4 × 16 mm)
330 mm
236 mm
Ø4.6
218.4 mm
230 mm
■ Accessories
Part name
External
View
Number of
Items
Self-tapping screws
(ø4 × 16 mm)
(ø4 × 16 mm)
4
Terminal cover
(Power terminal)
(Power terminal)
1
Speaker level input
cable
cable
1
Cooling fan
(KAC-M845)
(KAC-M845)
Cooling fan
(KAC-M845)
(KAC-M845)
B64-3924-00_00_M_1English.indd 3
B64-3924-00_00_M_1English.indd 3
07.11.15 11:29:31 AM
07.11.15 11:29:31 AM