Motorola DSR-6400 Manual Do Utilizador

DSR-6400 Series 

Use the following procedure to set and view the Subnet Mask address for the left Ethernet port on 
the back panel of the unit. Press the  buttons until the Subnet Mask menu appears. The subnet 

mask is represented in the common dotted-decimal format. Contact the network administrator for 
details about configuring the Ethernet port for operation on your local network.

Press the 4 button until the cursor is at the Subnet Mask label, and press ENTER to move into the 

field. Use the arrow button (4) to enter the desired address and then press ENTER to confirm 

the selection and exit the field.

Use the following procedure to set and view the Default Gateway address for the left (10/100) 
Ethernet port on the back panel. Press the  buttons until the 10/100 Default Gateway menu 

appears. The IP Gateway is an address that is represented in the common dotted-decimal format. 
Contact the network administrator for details about configuring the Ethernet port for operation on 
your local network.

Press the 4 button until the cursor is at the 10/100 Default Gateway label, and press ENTER to 

move into the field. Use the arrow buttons (4) to enter the desired gateway address and 

press ENTER to confirm the selection and exit the field.

To view the GigE MAC address for the right Ethernet port on the back panel, press the  

buttons until the Port GigE menu appears. The address is represented in a hexadecimal format and 
it is not editable.

   E           255.255.255.000

PORT 10/100   Subnet Mask

   E           192.168.000.001

PORT 10/100   Default Gateway

PORT GigE     MAC Address

  E           hh:hh:hh:hh:hh:hh