Kenwood KIV-BT900 Manual Do Utilizador
English
|
39
3
Enter Initial Setting mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Initial Settings”.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Initial Settings”.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Turn the [Volume] knob and press it when the
desired item is displayed.
Display
Overview
“Initial Settings”
“Source Select”
Sets the source selection method.
“1”/ “2”
“Beep”
Setting the operation check sound (beep sound)
ON/OFF.
“ON”/ “OFF”
“Menu Language
Select”
You can select the display language for the
Menu list item.
“English”/ “Français”/ “Español”
“Built in AUX”
When this is set to ON, AUX source can be
selected.
“ON”: Allows AUX source to be selected. Use
this setting when the built-in AUX terminal
is connected to the external equipment all
the time.
“OFF”: Disable AUX source selection. Use this
setting when the built-in AUX terminal is
not used.
“Favorite Delete” Deletes Favorite Preset Memory.
Refer to
.
“Built in AMP”
Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
“ON”/ “OFF”
“AV Out Set”
Changes the iPod setting from AV Output to
output-only terminal.
“ON”/ “OFF”
“System F/W
Update”
Updates the firmware. The update information
will be posted on the following URL as
necessary.
www.kenwood.com/cs/ce/
( : Factory setting)
5
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Demonstration Mode Setting
Turning the demonstration mode ON/OFF.
1
Enter Menu List mode
Press the [MENU] button.
Press the [MENU] button.
2
Enter Demonstration mode setting
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “DEMO Mode”.
3
Set the Demonstration mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “ON” or “OFF”.
4
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Function of KIV-700
Muting Volume upon Reception of
Phone Call
Phone Call
The audio system automatically mutes when a call
comes in.
comes in.
When a call comes in
“CALL” is displayed.
The audio system pauses.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
The “CALL” display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to
accessory. Refer to