Panasonic cq-rx300n Manual Do Utilizador

Página de 2
Operating Instructions
AAC WMA MP3 CD Player/Receiver 
Model:
 CQ-RX400N/CQ-RX300N
WMA MP3 CD Player/Receiver
Model:
 CQ-RX200N/CQ-RX103N/
CQ-RX102N/CQ-RX101N
• Please read these instructions carefully before using this product and keep this manual for future reference.
(CQ-RX400N)
Q’ty
Mounting Collar
(YEFX0217263A)
1
Trim Plate
(YGFC051023)
1
Power Connector
(K1HY13YY0002)
1
\CQ-RX400N\  \CQ-RX300N\ 
Remote Control Unit (includes a 
battery) 
(EUR7641010)
1
\CQ-RX400N\  \CQ-RX300N\ 
Removable Face Plate Case 
(YGFA134302)
1
\CQ-RX200N\  \CQ-RX103N\  \CQ-RX102N\  \CQ-RX101N\
Request for use of the Removable Face Plate Case: 
• To avoid trouble and ensure safety, use the optional Removable 
Face Plate Case (YGFA134302). 
Instruction kit
Q’ty
Operating Instructions
(English: 
YGFM286051)
(Deutsch : 
YGFM286052)
(Français : 
YGFM286053)
(Nederlands :  YGFM286054)
(Svenska : 
YGFM286055)
(Italiano : 
YGFM286056)
(Español : 
YGFM286057)
(Dansk : 
YGFM286058)
(Polski : 
YGFM286059)
(Česky : 
YGFM286060)
(Magyar : 
YGFM286061)
1 set
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
\CQ-RX400N\  \CQ-RX300N\
\CQ-RX200N\
System Upgrade Guidebook
(YGFM262851)
1
Installation Instructions
(English, Deutsch, Français,
Nederlands 
: YGFM294417)
(Svenska, Italiano, Español,
Dansk 
: YGFM294418)
(Polski, Česky, Magyar
 
: YGFM294419) 
1
PAN EUROPEAN GUARANTEE
(Warranty Card)
1
Accessories
Installation kit (YEP0FZ5700)
Q’ty
Lock Cancel Plate
1 set
Mounting Bolt (5 mm œ)
(CQ-RX400N/
CQ-RX300N)
Notes:
• The number in parentheses underneath each accessory part 
name is the part number for maintenance and service.
• Accessories and their part numbers are subject to modifi cation 
without prior notice due to improvements.
• Mounting Collar and Trim Plate are mounted on the main unit at 
shipment.
English
Safety Information
Q
 Read the operating instructions for the unit and all other 
components of your car audio system carefully before using the 
system. They contain instructions about how to use the system in 
a safe and effective manner. Panasonic assumes no responsibility 
for any problems resulting from failure to observe the instructions 
given in this manual. 
Warning
This pictograph intends to alert you to the presence 
of important operating instructions and installation 
instructions. Failure to heed the instructions may result 
in severe injury or death.
Q
 This manual uses pictographs to show you how to use the product 
safely and to alert you to potential dangers resulting from improper 
connections and operations. The meanings of the pictographs 
are explained below. It is important that you fully understand the 
meanings of the pictographs in order to use this manual and the 
system properly.
Caution
This pictograph intends to alert you to the presence 
of important operating instructions and installation 
instructions. Failure to heed the instructions may result in 
injury or material damage.
 Warning
Observe the following warnings when using this 
unit.
R
 The driver should neither watch the display nor operate 
the system while driving.
Watching the display or operating the system will distract the 
driver from looking ahead of the vehicle and can cause accidents. 
Always stop the vehicle in a safe location and use the parking 
brake before watching the display or operating the system.
R
 Use the proper power supply.
This product is designed for operation with a negative grounded 
12 V DC battery system. Never operate this product with other 
battery systems, especially a 24 V DC battery system.
R
 Keep batteries and insulation fi lm out of reach of infants.
Batteries and insulation fi lm can be ingested, so keep them out of 
the reach of infants. If an infant ingests a battery or insulation fi lm, 
please seek immediate medical attention.
R
 Protect the Deck Mechanism.
Do not insert any foreign objects into the slot of this unit.
R
 Do not disassemble or modify the unit.
Do not disassemble, modify the unit or attempt to repair the 
product yourself. If the product needs to be repaired, consult your 
dealer or an authorized Panasonic Service Centre.
R
 Do not use the unit when it is out of order.
If the unit is out of order (no power, no sound) or in an abnormal 
state (has foreign objects in it, is exposed to water, is smoking, or 
smells), turn it off immediately and consult your dealer.
R
 The remote control unit should not lie about in the car.
If the remote control unit lies about, it could fall on the fl oor while 
driving, get wedged under the brake pedal, and lead to a traffi c 
accident.
R
 Refer fuse replacement to qualifi ed service personnel.
When the fuse blows out, eliminate the cause and have it replaced 
with the fuse prescribed for this unit by a qualifi ed service 
engineer. Incorrect replacement of the fuse may lead to smoke, 
fi re, and damage to the product.
Observe the following warnings when installing.
R
 Disconnect the lead from the negative (–) battery 
terminal before installation.
Wiring and installation with the negative (–) battery terminal 
connected may cause electrical shock and injury due to a short 
circuit. Some cars equipped with the electrical safety system have 
specifi c procedures of battery terminal disconnection.
FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE 
UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYSTEM 
RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL 
INJURY OR DEATH.
R
 Never use safety-related components for installation, 
grounding, and other such functions.
Do not use safety-related vehicle components (fuel tank, brake, 
suspension, steering wheel, pedals, airbag, etc.) for wiring or 
fi xing the product or its accessories.
R
 Installing the product on the air bag cover or in a location 
where it interferes with airbag operation is prohibited.
R
 Check for piping, gasoline tank, electric wiring, and 
other items before installing the product.
If you need to open a hole in the vehicle chassis to attach or wire 
the product, fi rst check where the wire harness, gasoline tank, 
and electric wiring are located. Then open the hole from outside if 
possible.
R
 Never install the product in a location where it interferes 
with your fi eld of vision.
R
 Never have the power cord branched to supply other 
equipment with power.
R
 After installation and wiring, you should check the 
normal operation of other electrical equipment.
The continuation of their using in abnormal conditions may cause 
fi re, electrical shock or a traffi c accident.
R
 In the case of installation to an airbag-equipping 
car, confi rm warnings and cautions of the vehicle 
manufacturer before installation.
R
 Make sure the leads do not interfere with driving or 
getting in and out of the vehicle.
R
 Insulate all exposed wires to prevent short circuiting.
 Caution
Observe the following cautions when using this 
unit.
R
 Keep the sound volume at an appropriate level.
Keep the volume level low enough to be aware of road and traffi c 
conditions while driving.
R
 This unit is designed for use exclusively in automobiles.
R
 Do not operate the unit for a prolonged period with the 
engine turned off.
Operating the audio system for a long period of time with the 
engine turned off will drain the battery.
R
 Do not expose the unit to direct sunlight or excessive 
heat.
Otherwise these will raise the interior temperature of the unit, and 
it may lead to smoke, fi re, or other damage to the unit.
R
 Do not use the product where it is exposed to water, 
moisture, or dust.
Exposure of the unit to water, moisture, or dust may lead to 
smoke, fi re, or other damage to the unit. Make especially sure that 
the unit does not get wet in car washes or on rainy days. 
R
 Set the volume level to low enough before the AUX 
connection is completed.
Failure to observe this, the loud noise may come out and damage 
your speakers and your hearing. Direct connection of the speaker/
headphone output of an external device without any attenuator 
may distort sound or damage the connected external device. 
Observe the following cautions when installing.
R
 Refer wiring and installation to qualifi ed service 
personnel.
Installation of this unit requires special skills and experience. For 
maximum safety, have it installed by your dealer. Panasonic is not 
liable for any problems resulting from your own installation of the 
unit.
R
 Follow the instructions to install and wire the product.
Not following the instructions to properly install and wire the 
product could cause an accident or fi re.
R
 Take care not to damage the leads.
When wiring, take care not to damage the leads. Prevent them 
from getting caught in the vehicle chassis, screws, and moving 
parts such as seat rails. Do not scratch, pull, bend or twist the 
leads. Do not run them near heat sources or place heavy objects 
on them. If leads must be run over sharp metal edges, protect the 
leads by winding them with vinyl tape or similar protection.
R
 Use the designated parts and tools for installation.
Use the supplied or designated parts and appropriate tools to 
install the product. The use of parts other than those supplied 
or designated may result in internal damage to the unit. Faulty 
installation may lead to an accident, a malfunction or fi re.
R
 Do not block the air vent or the cooling plate of the unit.
Blocking these parts will cause the interior of the unit to overheat 
and will result in fi re or other damage.
R
 Do not install the product where it is exposed to strong 
vibrations or is unstable.
Avoid slanted or strongly curved surfaces for installation. If the 
installation is not stable, the unit may fall down while driving and 
this can lead to an accident or injury.
R
 Installation Angle
The product should be installed in a horizontal position with the 
front end up at a convenient angle, but not more than 30˚.
The user should bear in mind that in some areas there may be 
restrictions on how and where this unit must be installed. Consult 
your dealer for further details.
R
 Wear gloves for safety. Make sure that wiring is 
completed before installation.
R
 To prevent damage to the unit, do not connect the power 
connector until the whole wiring is completed.
R
 Do not connect more than one speaker to one set of 
speaker leads. (except for connecting to a tweeter) 
Observe the following cautions when handling the 
battery for the remote control unit.
\CQ-RX400N\  \CQ-RX300N\
• Use only specifi ed battery (CR2025).
• Match the polarity of the battery with the (+) and (–) marks in the 
battery case.
• Replace a dead battery as soon as possible.
• Remove the battery from the remote control unit when not using it 
for an extended period of time.
• Insulate the battery (by placing them in a plastic bag or covering 
them with vinyl tape) before disposal or storage.
• Dispose of the battery according to the local regulations.
• Do not disassemble, recharge, heat or short the battery. Do not 
throw a battery into a fi re or water.
In case of battery leakage
• Thoroughly wipe the battery liquid off the battery case and insert 
new battery.
• If any part of your body or clothing comes into contact with battery 
liquid, wash it with plenty of water.
• If battery liquid comes into contact with your eyes, wash them with 
plenty of water and get immediate medical attention. 
Observe the following cautions when using USB 
device.
\CQ-RX400N\  \CQ-RX300N\
• Do not connect a USB device directly to this unit. If the USB device 
is connected directly to this unit and an accident occurs, or if the 
brakes are applied suddenly, the driver or passenger may bump 
into the USB device and may get injured. 
• Position the USB device and USB extension cable so that they do 
not obstruct your driving. 
• Do not connect any USB device other than USB memory, a USB 
audio player or iPod series (\CQ-RX400N\). Do not connect multiple 
USB devices to the USB connector. Drawing power for multiple 
USB devices from the connector could cause overheating and 
smoking.
Caution Label
Deck Ass’y (in the unit, 
upper side)
Laser Product
Label Indications and Their Locations
CAUTION
LASER RADIATION WHEN OPEN. DO NOT STARE INTO 
BEAM.
CLASS 1 LASER PRODUCT
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be 
mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be 
accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer
upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human 
health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority 
for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Caution:
This product utilizes a laser.
Use of controls or adjustments or performance of 
procedures other than those specifi ed herein may 
result in hazardous radiation exposure.
Do not take apart this unit or attempt to make 
any changes yourself.
This unit is a very intricate device that uses a laser 
pickup to retrieve information from the surface of 
compact discs. The laser is carefully shielded so that its 
rays remain inside the cabinet.
Therefore, never try to disassemble the player or alter 
any of its parts since you may be exposed to laser rays 
and dangerous voltages.
(Bottom of the unit)
Before Reading These Instructions
Panasonic welcomes you to our constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and 
assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of 
enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family. 
\CQ-RX400N\  \CQ-RX300N\ \CQ-RX200N\
The instruction manual consists of 2 books. One is “Operating Instructions” describing the operations of the main unit. 
The other is “System Upgrade Guidebook” describing the optional devices such as CD changer.
Differences Among 6 Models
This operating instruction manual is for 6 models CQ-RX400N, CQ-RX300N, CQ-RX200N, CQ-RX103N, CQ-RX102N and CQ-RX101N. All illustrations throughout 
this manual represent model CQ-RX400N unless otherwise specifi ed. The following table describes the differences among 6 models.
Models
Features
CQ-RX400N
CQ-RX300N
CQ-RX200N
CQ-RX103N
CQ-RX102N
CQ-RX101N
Removable Face Plate Case Included
Included
Not included
Not included
Not included
Not included
Remote Control Unit
Included
Included
Not included
Not included
Not included
Not included
System Upgrade Guidebook Included
Included
Included
Not included
Not included
Not included
System-up Connector
Supported
Supported
Supported
Not Supported
Not Supported
Not Supported
Preamp Out Connector
2 (Front/Rear)
2 (Front/Rear)
1 (Rear)
1 (Rear)
1 (Rear)
1 (Rear)
USB Connector
Supported (USB iPod) Supported
Not Supported
Not Supported
Not Supported
Not Supported
AAC playback
Supported
Supported
Not Supported
Not Supported
Not Supported
Not Supported
Button logo colour
Blue
Red
Red
Blue
Green
Red
Maintenance/Fuse
Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior 
cleaning. Never use benzine, thinner, or other solvents.
If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Centre.
Anti-Theft System
This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.
Cleaning the Unit
Fuse
Notes:
• Do not touch the contacts on the face plate and the main 
unit, since this may result in poor electrical contact.
• If dirt or other foreign substances get on the contacts, wipe 
them off with a clean and dry cloth.
Face Plate Removing/Mounting
(Anti-Theft System)
 Warning
• Use fuses of the same specifi ed rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit directly 
without a fuse could cause fi re or damage to the unit. If the replaced fuse fails, contact your nearest authorized 
Panasonic Service Centre.
Removing
1
Turn off the power.
2
Press
[ ]. The face plate will open.
3
Pull it out toward you.
\CQ-RX400N\  \CQ-RX300N\ 
4
Put the face plate in the case. 
Mounting
1
Slide the left side of the face plate in place.
2
Press the right end of face plate until a 
“click” is heard.
Expansion Module (Hub Unit)
\CQ-RX400N\  \CQ-RX300N\  \CQ-RX200N\
Connection of the Expansion Module (hub unit, CY-EM100N) allows 
users to connect up to 4 optional devices shown below. 
Wide Array of Components for System Upgrade 
\CQ-RX400N\  \CQ-RX300N\  \CQ-RX200N\
Various optional components allow users to obtain availability of wide range of 
system upgrade. Upgrading the system delivers relaxed AV space in a car. For 
further information, refer to the separate System Upgrade Guidebook. 
iPod
The optional adaptor (Direct Cable for iPod: CA-DC300N) allows 
you to connect the optional iPod series. 
iPod is a trademark of Apple Inc., registered in the U.S. and other 
countries.
• CD Changer
The optional adaptor (Conversion Cable for DVD/CD Changer: 
CA-CC30N) allows you to connect the optional Panasonic CD 
changer unit (CX-DP880N).
Bluetooth
®
Using the optional Bluetooth Unit (CY-BT200N) and a Bluetooth 
device enables hands-free telephony and Bluetooth Audio listening 
with this unit. 
Note: This unit does not support CY-BT100N. 
Bluetooth
®
  The Bluetooth word mark and logo are owned by the Bluetooth SIG, 
Inc. and any use of such marks by Matsushita Electric Industrial Co., 
Ltd. is under license. Other trademarks and trade name are those of 
their respective owners.
Features
SQ (Sound Quality)
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ, CLUB). You 
can customize your settings for these and save them for instant recall.
SQ3 (3-Band Sound Quality) 
Center frequency and level are adjustable in each of 3 bands. This lets 
you fi ne-tune sound quality for each genre to suit car-interior acoustics 
and your personal preferences. (
«
 “Sound Control”) 
USB Connector
\CQ-RX400N\  \CQ-RX300N\
The USB Connector is equipped on the front panel. (
«
System
Upgrade Guidebook)
By connecting a USB memory (not included) to USB connector via a 
USB extension cable (USB 2.0, not included), you can enjoy MP3/
WMA/AAC fi les stored on the USB memory (not included) in your car. 
\CQ-RX400N\
By connecting iPod series to USB connector via a USB extension cable 
for iPod (USB 2.0, not included), you can enjoy music fi les stored on 
the iPod series in your car. 
AUX (AUX1) Input Terminal
The AUX input terminal is equipped on the front panel. 
Your mobile audio player and other devices are connectable to this unit 
without any diffi culty.  
Printed in China
Specifi cations
General
Power supply 
:  DC 12 V (11 V – 16 V DC), test 
voltage 14.4 V, negative ground
Current consumption 
:  Less than 2.1 A
   
 (CD mode; 0.5 W x 4 channels)
Maximum power output 
:  50 W x 4 channels (at 1 kHz), 
volume control maximum 
Power output 
:  22 W x 4 channels 
(DIN 45 324, at 4 j ) 
Tone/SQ adjustment range  : SQ Low/Bass: ±12 dB 
   
 (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
   
 SQ Mid: ±12 dB 
   
 (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
   
 SQ High/Treble: ±12 dB 
   
 (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
Speaker impedance 
: 4 – 8 j
Pre-amp output voltage 
: 2.0 V (CD mode, 1 kHz, 0 dB)
Pre-amp output impedance  : 200 j
USB Connector \CQ-RX400N\ \CQ-RX300N\
USB Standard Compatibility  : 1.1/2.0 Full Speed
  Maximum Supply Current : 500 mA
Front AUX input
  Input impedance 
: 10 kj
  Allowable external input  : 2.0 V
  Connector 
: 3.5 mm œ Stereo mini-pin 
Dimensions (W x H x D) 
: 178 x 50 x 160 mm 
Weight 
: 1.2 kg
Disc Player
Sampling frequency  
: 8 times oversampling
DA converter 
: 1 bit DAC System
Pick-up type 
: Astigma 3-beam
Light source 
: Semiconductor laser
Wave length 
: 790 nm
Frequency response 
: 20 Hz – 20 kHz (±1 dB)
Signal to noise ratio 
: 96 dB
Total harmonic distortion 
: 0.01 % (1 kHz)
Wow and fl utter 
: Below measurable limits
Channel separation 
: 85 dB
Sales and Support Information
For UK and Ireland customers only.
Direct Sales at Panasonic UK
• Order accessories and consumable items for your product with ease and 
confi dence by phoning our Customer Care Centre Monday - Thursday 
9:00am - 5:30pm, Friday 9:30am - 5:30pm. (Excluding public holidays).
• Or go on line through our Internet Accessory ordering application at 
www.panasonic.co.uk.
• Most major credit and debit cards accepted. 
• All enquiries, transactions and distribution facilities are provided 
directly by Panasonic UK Ltd.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide range of 
fi nished products, so take a browse on our website for further details.
Customer Care Centre
• For customers within the UK: 0844 844 3852
• For customers within the Republic of Ireland: 01 289 8333
• Visit our website for product information 
  www.panasonic.co.uk.
• E-mail: customer.care@panasonic.co.uk
Notes:
• Remote Control Unit for CQ-RX200N/CQ-RX103N/CQ-RX102N/
CQ-RX101N is option (CA-RC80N). 
• The optional remote control is available from your local dealer. 
(CA-RC80N)
Power
Mode
(Source)
Tune
Track selection 
Fast forward/fast reverse
(CA-RC80N)
Mute/attenuation
Volume 
Band
Pause
FM Radio
Frequency range 
: 87.5 MHz – 108.0 MHz
Usable sensitivity 
: 6 dB/µV (S/N 30 dB)
Stereo separation 
: 35 dB (at 1 kHz)
AM (MW) Radio
Frequency range  
: 531 kHz – 1 602 kHz
Usable sensitivity 
: 28 dB/µV (S/N 20 dB)
AM (LW) Radio
Frequency range  
: 153 kHz – 279 kHz
Usable sensitivity 
: 32 dB/µV (S/N 20 dB)
Notes:
• Specifi cations and design are subject to modifi cation without 
notice due to improvements.
• Some fi gures and illustrations in this manual may be different 
from your product.
Authorized Representative
[Requirements of the EMC directive]:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH 
Winsbergring 15, 22525 Hamburg, F.R. Germany
Matsushita Electric Industrial Co., Ltd.
Web Site: http://panasonic.net
Notes on MP3/WMA/AAC
Notes on MP3/WMA/AAC
Playable Audio File 
CQ-RX400N
MP3/WMA/AAC
CQ-RX300N
MP3/WMA/AAC
CQ-RX200N
MP3/WMA
CQ-RX103N
MP3/WMA
CQ-RX102N
MP3/WMA
CQ-RX101N
MP3/WMA
Notes for AAC playback is only for the model CQ-RX400N/
CQ-RX300N.
What is MP3/WMA/AAC?
MP3* (MPEG Audio Layer-3) and WMA (Windows Media
TM
Audio) are the compression formats of digital audio. The former 
is developed by MPEG (Motion Picture Experts Group), and 
the latter is developed by Microsoft Corporation. Using these 
compression formats, you can record the contents of about 
10 music CDs on a single CD media (This fi gures refer to data 
recorded on a 650 MB CD-R or CD-RW at a fi xed bit rate of 
128 kbps and a sampling frequency of 44.1 kHz).
*MPEG Layer-3 audio coding technology licensed from 
Fraunhofer. 
AAC is an abbreviation for “Advanced Audio Coding”.
It has been defi ned as a standard for audio compression 
technology using MPEG 2 and MPEG 4.
Note: MP3/WMA/AAC encoding and writing software is not 
supplied with this unit.
Points to Remember When Making MP3/
WMA/AAC Files
Common
• High bit rate and high sampling frequency are recommended 
for high quality sounds.
• Selecting VBR (Variable Bit Rate) is not recommended 
because playing time is not displayed properly and sound 
may be skipped. 
• The playback sound quality differs depending on the 
encoding circumstances. For details, refer to the instructions 
of your own encoding software and writing software.
MP3
• It is recommended to set the bit rate to “128 kbps or more” 
and “fi xed”.
WMA
• It is recommended to set the bit rate to “64 kbps or more” 
and “fi xed”.
• Do not set the copy protect attribute on the WMA fi le to 
enable this unit to play back. 
AAC
• It is recommended to set the bit rate to “128 kbps or more” 
and “fi xed”.
• The formats and extensions for AAC data vary according to 
the encoder software used. 
• AAC fi les which can be played on this unit have the “.m4a” 
extension and were encoded with Apple iTunes
®
 version 7. 
• The fi le extension for fi les encoded with the iTunes Apple 
Lossless Encoder is “.m4a”, but such fi les cannot be played 
on this player.
• Files under copyright protection cannot be played. 
Caution
Never assign the “.mp3”, “.wma” or “.m4a” fi le 
name extension to a fi le that is not in the MP3/
WMA/AAC format. This may not only produce 
noise from the speaker damage, but also damage 
your hearing.
iTunes is a trademark of Apple Inc., registered in the U.S. 
and other countries/regions. 
Windows Media, and the 
Windows logo are trademarks, or 
registered trademarks of Microsoft 
Corporation in the United States 
and/or other countries/regions.
Notes on MP3/WMA/AAC (continued)
Display Information
Displayed items
• CD-TEXT
Disc title
Track title
• MP3 (ID3 tag)
Album name
Title name/artist name
• MP3/WMA/AAC
Folder name
File name
• WMA (WMA tag)
Album name
Title name/artist name
• AAC (Song information) 
Album name
Title name/artist name
Displayable characters
• Displayable length of fi le name/folder name: within 
32 characters. (Unicoded fi le and folder names are reduced 
by half in the number of displayable characters.)
• Name fi les and folders in accordance with the standard of 
each fi le system. Refer to the instructions of writing software 
for details.
• ASCII character set and special characters in each language 
can be displayed. 
• Some Cyrillic characters in the Unicode can be displayed. 
ASCII character set
A to Z, a to z, digits 0 to 9, and the following symbols:
(space) ! ” # $ % & ’ ( )  * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ~
Special Characters
À Á Â Ã Å à á â ã å
Ä ä
Ò Ó Ô Õ Ö ò ó ô õ ö
Ù Ú Û Ü ù ú û ü
Notes:
• With some software in which MP3/WMA/AAC format fi les 
have been encoded, the character information may not be 
displayed properly. 
• Undisplayable characters and symbols will be converted into 
an asterisk ( ).
• It is recommended that the length of the fi le name is less 
than 8 characters (excluding the fi le extension). 
Recording MP3/WMA/AAC Files on a CD-
Media/USB-Device
• You are recommended to minimize the chances of making 
a disc that contains both CD-DA fi les and MP3/WMA/AAC 
fi les.
• If CD-DA fi les are on the same disc as MP3, WMA or AAC 
fi les or the songs may not play in the intended order, or 
some songs may not play at all.
• When storing MP3 data, WMA data or AAC data on the 
same disc, use different folders for each data.
• Do not record fi les other than MP3/WMA/AAC fi les and 
unnecessary folder on a disc.
• The name of an MP3/WMA/AAC fi le should be added by 
rules as shown in the following descriptions and also comply 
with the rules of each fi le system. 
• The fi le extension “.mp3”, “.wma” or “.m4a” should be 
assigned to each fi le depending on the fi le format.
• You may encounter trouble in playing MP3/WMA/AAC fi les or 
displaying the information of MP3/WMA/AAC fi les recorded 
with certain writing software or CD recorders.
• This unit does not have a play list function.
• Although Multi-session recording is supported, the use of 
Disc-at-Once is recommended.
Supported fi le systems
Q
CD-media
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet, 
Romeo
Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are not 
supported.
Q
USB-device
\CQ-RX400N\ \CQ-RX300N\
File system is FAT12/16/32
Compression formats
(Recommendation: “Points to Remember When Making MP3/WMA/AAC Files” 
«
Left)
\CQ-RX400N\  \CQ-RX300N\
Compression method 
Bit rate
VBR Sampling frequency
MPEG 1 Audio Layer-3 (MP3)
32 k – 320 kbps Yes
32, 44.1, 48 kHz
MPEG 2 Audio Layer-3 (MP3)
8 k – 160 kbps
Yes
16, 22.05, 24 kHz
MPEG 2.5 Audio Layer-3 (MP3)
8 k – 160 kbps
Yes
8, 11.025, 12 kHz
Windows Media Audio Ver. 2B9*
64 k – 160 kbps Yes
32, 44.1, 48 kHz
MPEG 4 Advanced Audio Coding Low Complexity 
(AAC LC)
16 k – 320 kbps Yes
8, 11.025, 12, 16, 22.05, 24, 32, 
44.1, 48 kHz
* WMA 9 Professional/LossLess/Voice are not supported. 
Notes on MP3/WMA/AAC (continued)
Folder Selection Order/File Playback Order
Maximum number of fi les/folders
• Maximum depth of trees: 8
\CQ-RX400N\  \CQ-RX300N\ 
• Maximum number of fi les 
    CD-media: 999 
    USB device: 65 535
• Maximum number of fi les in one folder
    CD-media: 999 
    USB device: 999 
• Maximum number of folders: 
    CD-media: 256 (Root folder is included.)  
    USB device: 255 (Root folder is included.) 
\CQ-RX200N\  \CQ-RX103N\  \CQ-RX102N\  \CQ-RX101N\
• Maximum number of fi les: 999
• Maximum number of fi les in one folder: 999
• Maximum number of folders: 256 (Root folder is included.) 
Notes:
• You can shorten the duration between data read and 
playback by decreasing the quantity of fi les or folders, or the 
depth of the hierarchy.
• This unit counts the number of folders irrespective of the 
presence or absence of an MP3/WMA/AAC fi le.
• If the selected folder does not contain any MP3/WMA/AAC 
fi les, the nearest MP3/WMA/AAC fi les in the order of 
playback will be played.
• Playback order may be different from other MP3/WMA/AAC 
players even if the same disc is used.
• “ROOT” appears when displaying the root folder name. 
\CQ-RX400N\  \CQ-RX300N\
• Empty folders stored on the USB memory are not included in 
the folder count. 
• Depending on the connected USB memory, the order in 
which the fi les are played back may differ to the order in 
which the fi les were stored.
1
1
4
5
6
2
3
8
7
8
Root folder 
(Root Directory)
Folder Selection 
In the order 
Tree 1 Tree 2 Tree 3 Tree 4
Tree 8 (Max.)
File Selection 
In the order 
Q
CD-media
Q
USB-device
\CQ-RX400N\  \CQ-RX300N\
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5
Tree 8 (Max.)
1
4
5
2
3
1
5
Root folder 
(Root Directory)
Folder Selection 
In the order 
File Selection 
In the order 
\CQ-RX200N\  \CQ-RX103N\  \CQ-RX102N\  \CQ-RX101N\
Compression method 
Bit rate
VBR Sampling frequency
MPEG 1 Audio Layer-3 (MP3)
32 k – 320 kbps Yes
32, 44.1, 48 kHz
MPEG 2 Audio Layer-3 (MP3)
8 k – 160 kbps
Yes
16, 22.05, 24 kHz
MPEG 2.5 Audio Layer-3 (MP3)
8 k – 160 kbps
Yes
8, 11.025, 12 kHz
Windows Media Audio Ver. 2B9*
64 k – 160 kbps Yes
32, 44.1, 48 kHz
* WMA 9 Professional/LossLess/Voice are not supported. 
If You Suspect Something Wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, it is 
recommended to take the unit to your nearest authorized Panasonic 
Service Centre. The product should be serviced only by qualifi ed 
personnel. Please refer the checking and the repair to professionals. 
Panasonic shall not be liable for any accidents arising out of neglect 
of checking the unit or your own repair after your checking.
Never take measures especially those other than 
indicated by italic
 letters in “Possible Solution” described 
below because those are too dangerous for users to 
handle themselves.
Troubleshooting
 Warning
• Do not use the unit in an irregular condition, for example, 
without sound, or with smoke or a foul smell, which can cause 
ignition or electric shock. Immediately stop using the unit and 
consult your dealer.
• Never try to repair the unit by yourself because it is dangerous 
to do so.
Common
No power
Start the engine. (Or turn the ignition 
switch to the ACC position.)
Verify the wiring. (battery lead, power 
lead, ground lead, etc.)
Fuse blown (Contact the nearest Panasonic 
Service Centre.)
Ask a professional for fuse replacement.
Be sure to use the same rated fuse.
No sound
Disable the mute function.
Verify the wiring.
Wait until the dew disappears before 
turning on the unit.
Noise
Make sure that grounding is established 
properly.
No sound from 
left, right, front, 
or rear speaker
Adjust the balance and fader.
Verify the wiring.
Left and right 
sounds are 
reversed
Connect the speaker lead correctly.
Radio
Frequent noise
Tune in to another station of high-intensity 
waves.
Make sure that the antenna mounted point 
is grounded properly.
Preset data 
deleted
The preset memory is cleared to return 
to the original factory setting when 
the power connector or battery is 
disconnected.
Error Display Messages (Disc Player)
(The disc is ejected automatically.)
The disc is dirty or upside down.
Check the disc.
(The disc is ejected automatically.)
The disc has scratches.
Check the disc.
No operation by some cause.
If normal operation is not restored, 
consult your dealer or the nearest 
Service Centre to ask for repairs.
Cannot read the fi le
Check the disc.
A WMA/AAC fi le can be copyrighted.
The fi le protected by copyright is not 
playable.
Trouble
Possible Solution
Trouble
Possible Solution
\CQ-RX400N\  \CQ-RX300N\  \CQ-RX200N\ 
Note: Refer to the System Upgrade Guidebook for error messages 
regarding optional products. 
Disc Player
No sound, or disc 
is automatically 
ejected
Load the disc correctly.
Clean the disc.
Sound skip, poor 
sound quality
Clean the disc.
Sound skip due to 
vibration
The maximum permissible tilt angle is 
30°.
Secure the unit.
Disc not ejectable
Press []. If the disc is still not ejected, 
contact the nearest Panasonic Service 
Centre.
Notes on Discs
N
otes on CD/CD Media (CD-ROM, CD-R, CD-RW)
Printed side
How to hold the disc
• Do not touch the underside of the disc.
• Do not scratch on the disc.
• Do not bend the disc.
• When not in use, keep disc in the case.
Do not use discs that fi t any of the descriptions given 
below. Using these discs may damage the discs or cause 
the unit to malfunction. 
• Special discs in a shape which is not round
• Partly or wholly transparent disc
Wholly transparent disc
Partly transparent disc
Wholly semi-transparent disc may not be played back.
• Discs with adhered labels, etc. on them
Disc with adhered stickers 
or tape
Labels created by a printer
Protective fi lms or sheets
Discs accessories (stabilizers, 
etc.)
• Damaged or deformed discs
Shoddily made discs
Discs with cracks, scratches or 
parts missing
Discs with burrs 
Please remove the burrs 
before use. 
Disc Insert
The surfaces of new discs tend to be slippery. Therefore, 
when using such a disc for the fi rst time, it may not load 
satisfactorily even when it has been inserted into the unit. At 
a time like this, insert the disc into the unit as far as it will go 
until it is loaded properly. 
• When inserting a disc into or ejecting and removing it 
from the unit, insert it straight in or eject and remove it 
straight out in parallel with the unit. 
  Observe, the disc may be scratched or marked in the 
process.
• When inserting a disc, do not put one disc on another. 
Failure to observe this may cause the discs to be 
jammed.
Do not leave discs in the following places:
• Direct sunlight
• Near car heaters
• Dirty, dusty and damp areas
• On seats and dashboards
Disc cleaning
• Use a dry, soft cloth to wipe from the center outward. 
<Correct>
<Wrong>
• Do not attach any seals or labels to your discs. 
• Do not write on the disc label in a heavy pen or ballpoint 
pen.
Notes on CD-Rs/RWs
• You may have trouble playing back some CD-R/RW discs 
recorded using CD recorders (CD-R/RW drives), either 
due to their recording characteristics or dirt, fi ngerprints, 
scratches, etc. on the disc surface.
• CD-R/RW discs are less resistant to high temperatures 
and high humidity than ordinary music CD. Leaving them 
inside a car for extended periods may damage and make 
playback impossible.
• The unit may not successfully playback a CD-R/RW, 
that was made by the combination of writing software, 
a CD recorder (CD-R/RW drive) and a disc if they are 
incompatible with one another. 
• This player cannot play the CD-R/RW discs if the session is 
not closed.
• Be sure to observe the handling instructions of CD-R/RW 
discs.
• This player cannot play CD-R/RW discs which contain 
other than CD-DA or MP3/WMA/AAC data (Video CD, etc.).
If you use commercial CDs, they must have either of these labels shown at 
right. 
Some copy-protected music CDs are not playable.
Copyright
It is prohibited by copyright laws to copy, distribute and 
deliver copyrighted materials such as music without the 
approval of copyright holder except enjoying yourself 
personally.  
No warranty
Above description complies with our investigations as of 
September 2007. It has no warranty for reproducibility and 
displayability of MP3/WMA/AAC.
YGFM286051A   FT1007-1117