Panasonic CQ-CB8901U Manual Do Utilizador

21

20

This chapter explains how to listen to the radio.

Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.

Preset stations can be simply called up by pressing [}]
(P·SET) or [{] (P·SET).

¡

Direct selection can be executed with [1] to [6] but-
tons on remote control.

¡

Preset stations are changeable.

Stations with good receiving conditions automatically preset. 

Select a band.

Hold down

[BAND] (APM) for

2 sec. or more.

The stations that broadcast digital signals are stored
in the memory in sequence with the station featuring
the best reception first and starting with the highest
preset number whereas the stations that broadcast
only analog signals are stored in the memory in
sequence starting with the lower preset number.

The stations that broadcast digital signals are saved
in sequence with the one featuring the best reception
first. (this may take some time.)

The 6 stations with good reception will be automatically
saved in the memory under preset number [1] to [6].

The preset stations under best receiving conditions are
received for 5 sec. each after presetting the stations
(SCAN). To stop scanning, press [}] or [{].

Note: New stations overwrite existing saved stations.

Tune in to a station.

Hold down 

[}]

or 

[{]

for 2 sec. or more.

Select a preset number by pressing 

[}]

or 

[{]

.

Preset the station by holding down 

[}]

or 

[{] 

for 2 sec. or more.

Frequency/preset number blinks once.

¡

New stations overwrite existing saved stations.

¡

In step 2, a station can be stored by holding down the
one of the preset buttons [1] to [6] for 2 sec. or more.

¡

To stop presetting stations, press [DISP] (Display).

Press [SRC] (Source) to select the

radio mode.

Press [BAND] to select a band.

Select a station.

[]] (TUNE): Lower

[[] (TUNE): Higher

Note: Hold down for 0.5 sec. or more and release
for station search. Seeking will starts.

[{] (P·SET: Preset): Lower preset number

[}] (P·SET: Preset): Higher preset number

Note: Direct selection can be executed with [1] to
[6] buttons on remote control.

Band

Frequency

Preset Number

(APM: Auto Preset Memory, P·SET: Preset)