Panasonic CQ-C500U Manual Do Utilizador

11

This chapter explains how to turn on or off the power, how to adjust the volume, etc.

Press

[PWR] (Power).

Hold down

[PWR] (Power) for 1 sec. or

more.

You can remove the face plate to 
prevent it from being stolen.

Turn off the power.

(



 

above)

Press

[OPEN]. The face plate will be

opened.

Push the face plate to the
left.

Pull it out toward you.

Put the face plate in

the case.

• This face plate is not waterproof. Do not expose it to 

water or excessive moisture.

• Do not remove the face plate while driving your car. 
• Do not place the face plate on the dashboard or 

nearby areas where the temperature rises to high.

• Do not touch the contacts on the face plate or on 

the main unit, since this may result in poor electrical 
contacts.

• If dirt or other foreign substances get on the 

contacts, wipe them off with clean and dry cloth.

• To avoid damaging the face plate, do not push it 

down or place objects on it while it is open.

 (PWR: Power)

(Anti-Theft System)

(DISP: Display)

The display changes as follows every time [DISP] is 
pressed. 

Clock display (Default)

Display Off

Fit the face plate with its left hole on the
left pin provided on the main unit.

Fit the other hole on the other pin
applying slight pressure.

When the power is set to ON, refer to the description for  
each source mode.