ONKYO CR-505DAB Manual Do Utilizador
29
Using the Radio—Continued
With the Auto Preset function you can automatically preset
all the FM stations available in your area.
all the FM stations available in your area.
1
Press the [FM] button.
2
Press the [MODE] button.
3
Use the [
]/[
] buttons to display “Pre-
set Edit,” and then press the [ENTER] but-
ton.
ton.
4
Use the [
]/[
] buttons to display “Auto
Preset?,” and then press the [ENTER] but-
ton.
ton.
Auto Preset function starts.
The Auto Preset function scans the FM band from low
to high, presetting up to 30 stations with strong signals.
The Auto Preset function scans the FM band from low
to high, presetting up to 30 stations with strong signals.
Note:
All previously stored presets will be overwritten when the
Auto Preset function is used again.
All previously stored presets will be overwritten when the
Auto Preset function is used again.
Using the buttons on the CR-505DAB:
1. Use the [INPUT] button to select FM.
2. Press the [MENU] button.
3. Turn the [
1. Use the [INPUT] button to select FM.
2. Press the [MENU] button.
3. Turn the [
] control until “Preset Edit” appears on
the display and then push the [
] control.
4. Turn the [
] control until “Auto Preset?” appears
on the display and then push the [
] control.
You can preset up to 40 of your favourite AM and FM radio
stations.
stations.
1
Tune into the station that you want to store
as a preset.
as a preset.
2
Press the [MODE] button.
3
Use the [
]/[
] buttons to display “Pre-
set Edit,” and then press the [ENTER] but-
ton.
ton.
4
Use the [
]/[
] buttons to display “Pre-
set Write?,” and then press the [ENTER]
button.
button.
The preset number flashes.
5
While the preset number is flashing, use
the [
the [
]/[
] buttons to select a preset
number from 1 to 40.
You cannot choose any preset number that has already
been registered for either the FM or AM station.
been registered for either the FM or AM station.
6
Press the [ENTER] button to store the sta-
tion.
tion.
The station is stored and the preset number stops flash-
ing.
Repeat this procedure for all of your favourite radio
stations.
ing.
Repeat this procedure for all of your favourite radio
stations.
Note:
When the CR-505DAB is tuned into a station that’s trans-
mitting PS (Program Service Name) RDS information, the
station’s name will be displayed instead of the frequency.
When the CR-505DAB is tuned into a station that’s trans-
mitting PS (Program Service Name) RDS information, the
station’s name will be displayed instead of the frequency.
Using the buttons on the CR-505DAB:
1. Tune into the station that you want to store as a preset.
2. Press the [MENU] button.
3. Turn the [
1. Tune into the station that you want to store as a preset.
2. Press the [MENU] button.
3. Turn the [
] control until “Preset Edit” appears on
the display and then push the [
] control.
4. Turn the [
] control until “Preset Write?” appears
on the display and push the [
] control.
5. While the preset number is flashing, use the [
]
control to select a preset number from 1 to 40.
6. Press the [
] control to store the station.
You can select previously stored presets as follows.
Using the CR-505DAB
1
Turn the [
] control to select presets.
Using the remote controller
1
Use the PRESET [
]/[
] buttons to
select presets.
Presetting FM Stations Automatically
Presetting Stations Manually
/
/
/
/
Selecting Presets
/
/
/
/
/
/
/