Faber M1024 Manual Do Utilizador

50  •  Operational Reference 

 

Sapera

 

Genie Sapera parameters for Trigger Modes and General Inputs: 
TriggerDelayToIntegration = Delay in µs from trigger to exposure 
TriggerEnable = {FALSE, TRUE} 
TriggerSource = {Input 1 = 0, Input 2 = 1, Software = 2} 
TriggerSoftware = {FALSE, TRUE} 
FramesPerTrigger = Frame count 1 to 64k 
PolarityInput_x = {Active High = 0, Active Low = 1} 
DebounceInput_x = debouncing period in µs (from 1 to 255 µs) 
See 

"

.  

 

 

 

GenICam features for Trigger Modes and General Inputs: 
TriggerMode = {Off = 0, On = 1} 
TriggerSelector = (not used)  
TriggerSoftware = Generates a software trigger to start the acquisition in software trigger mode 
TriggerSource = {Line2 = 1, Software = 2} 
TriggerActivation = {LevelLow = 0, LevelHigh = 1} 
TriggerDelayAbs = Absolute delay to apply in us after reception of the trigger signal before 
starting exposure 
InputLineSelector = Index to general input {input1=0, input2=1}  
InputLinePolarity = {Active High = 0, Active Low = 1} 
InputLineDebouncingPeriod = debounce period in µs (from 1 to 255 µs) 
InputLineValue = Read input line state {low=0, high=1}