Sony 3-869-888-16 (1) Manual Do Utilizador
19
Chapter 2 Initial Configuring the System
8
Perform the following steps to configure the network settings.
(1) Enter an IP address for each server in the [General Network Setting]
screen, and click [Next].
Primary DNS
Enter the primary DNS (Domain Name Server) IP address.
When there is no primary DNS or one is not necessary, do not enter an
IP address.
Enter the primary DNS (Domain Name Server) IP address.
When there is no primary DNS or one is not necessary, do not enter an
IP address.
Secondary DNS
Enter the secondary DNS IP address.
When there is no secondary DNS or one is not necessary, do not enter
an IP address.
Enter the secondary DNS IP address.
When there is no secondary DNS or one is not necessary, do not enter
an IP address.
Default Gateway
Enter the default gateway IP address.
When only the local network is used or connection to other networks is
not necessary, do not enter an IP address.
Enter the default gateway IP address.
When only the local network is used or connection to other networks is
not necessary, do not enter an IP address.
The [Network Device #1] screen appears.
(2) Configure the [Network Device] settings for each of the LAN ports.
When using the NSR-100/50, configure the settings for each of the
three LAN ports (LAN1, LAN2, and LAN 3).
When using the NSR-25, configure the settings for the single LAN port
(LAN1).
three LAN ports (LAN1, LAN2, and LAN 3).
When using the NSR-25, configure the settings for the single LAN port
(LAN1).
Note
When using the NSR-100/50, connect the following devices to each of
the LAN ports.
LAN1: Network cameras
LAN2: Remote clients
LAN3: External storage devices (This may not be supported depending
on the software version. For details, consult your dealer.)
the LAN ports.
LAN1: Network cameras
LAN2: Remote clients
LAN3: External storage devices (This may not be supported depending
on the software version. For details, consult your dealer.)