SECO-LARM USA EV-2240-P3B Manual Do Utilizador

ENFORCER Mini Indoor Dome Camera

 

 

SECO-LARM U.S.A., Inc.                                                                                       3 

 

 

 

 

               33                                              3                                                                                         

 

 

 

 

 

 

 

 

 

 

 

1.  Please read this manual carefully and keep it 

for future reference. 

2.  Use the camera within given temperature and 

electricity limits. 

3.  Do not point the camera at the sun.  Heat could 

damage the camera, even when not in use. 

4.  Do not mount the camera in areas exposed to 

radiation, strong magnetic fields, or strong 
electrical signals* 

 

5. Do not drop the camera or subject it to 

strong vibrations. 
 

 

Note: Many video monitors produce strong 

electromagnetic fields close to the display 
CRT, especially when the monitor is turned 

on or during de-gaussing, which occurs 
automatically with many monitors when 
turned on. 

 

1.  Run hidden cables from the video source and 

12VDC power supply to the camera.  Do not 
cut the DC jack or female BNC connector as 

this will void the warranty.   

2.  Test to make sure the voltage is correct.   

Use only 12VDC.  

3.  Carefully twist the dome from the base.  

4.  Hold the camera against the wall, ceiling, or 

other mounting surface while watching the 

monitor to find the best mounting location.  Mark 
that location with a pencil. 

5.  Mount the mounting base to the wall using 

4 mounting screws (not included).  If 
mounting to drywall or brick, it may be 

necessary to use screw anchors (not 
included). 

6.  Adjust the camera angle as needed. 

7.  Test the video signal. 
8.  Reattach the dome to the camera. 
9.  Do a final test of the video camera  

and monitor. 

 

Dome cover 

Camera 

Mounting screws  

(not included) 

DC jack 

Female BNC connector 

DC plug with 
terminal block 
(not included)