IBM 21Y Manual Do Utilizador

Página de 210
 General information
 
5
The server supports up to two Pentium III microproces-
sors.  The server comes with at least one processor 
installed; you can install an additional processor to 
enhance performance and provide SMP capability.
Large system memory  
The memory bus in the server supports up to 
2 gigabytes (GB) of system memory.  The memory con-
troller provides error correcting code (ECC) support for 
up to four industry standard PC133, 3.3 V, 168-pin, 8-
byte, registered, synchronous-dynamic-random access 
memory (SDRAM) dual inline memory modules 
(DIMMs).
System-management capabilities  
The Netfinity Manager software provided on the Serv-
erGuide CDs enables you to manage the functions of 
the server locally and remotely.  See “Netfinity Man-
ager” on page 75 f
or more information.
Integrated network environment support  
The server comes with an Ethernet controller on the 
system board.  This Ethernet controller has an interface 
for connecting to 10-Mbps or 100-Mbps networks.  The 
server automatically selects between 10BASE-T and 
100BASE-TX environments.  The controller provides 
full-duplex (FDX) capability, which enables simulta-
neous transmission and reception of data on the Ether-
net local area network (LAN).
IBM ServerGuide CDs  
The ServerGuide CDs included with IBM Netfinity serv-
ers provide programs to help you set up the server and 
install the network operating system (NOS).  The Serv-
erGuide program detects the hardware options that are 
installed, and provides the correct configuration pro-
gram and device drivers.  In addition, the ServerGuide 
CDs include a variety of application programs for the 
server.
Reliability, availability, and serviceability
Three of the most important features in server design are 
reliability, availability, and serviceability (RAS).  These fac-
tors help to ensure the integrity of the data stored on the 
server; that the server is available when you want to use it; 
and that should a failure occur, you can easily diagnose and 
repair the failure with minimal inconvenience.
The following is an abbreviated list of the RAS features that 
the server supports.   
Menu-driven setup, system configuration, RAID config-
uration, and diagnostic programs
Power-on self-test (POST)
Error codes and messages
Upgradable BIOS and diagnostics
Automatic restart after a power failure
CRC checking on the SCSI buses
Error checking and correcting (ECC) memory