Spectra Watermakers 956YH60001 Manual Do Utilizador
5
Chapter 5
Web-based Management
This Chapter provides Setup details of the Network Camera’s Web-based Interface. This Chapter is for the Camera
Administrator only.
Administrator only.
Introduction
The Network Camera can be configured using your Web Browser. The Network Camera must have an IP address which is compatible
with your PC.
with your PC.
The recommended method to ensure this is to use the supplied Windows-based Wizard, as described in Chapter 2 - Basic Setup.
Connecting to Network Camera
• If using only your Web Browser, use the following procedure to establish a connection from your PC to the Network Camera:
• Once connected, you can add the Network Camera to your Browser's Favorites or Bookmarks.
• Once connected, you can add the Network Camera to your Browser's Favorites or Bookmarks.
Connecting using your Web Browser
1. Use the Windows utility to get the IP address of the Network Camera.
2. Start your WEB browser.
3.
In the Address box, enter "HTTP://" and the IP Address of the Network Camera.
4. You will then be prompted for a username and password.
• If using the default values, enter administrator for the name, and leave the password blank.
• Otherwise, enter the Administrator ID and Administrator Password set on the Maintenance screen.
• Otherwise, enter the Administrator ID and Administrator Password set on the Maintenance screen.
25