SMART Technologies 280 Manual Do Utilizador

22

99-00864-20 D0

3.

Press the Menu button on the document camera control panel.

The on-screen display menu appears. For more information on using the on-screen 
display menu, see page 9.

4.

Select Format Media in the on-screen display menu, and then press the right arrow button 
to display its submenu.

5.

Select Format?, and then press the Menu button 

 to confirm your selection.

1.

After you finish using the SD memory card, press the Camera button 

 on the document 

camera control panel to display the camera image on the connected projector or display.

2.

Push the SD memory card to remove it from the slot.

If you connect a computer to the document camera using a USB cable, you can transfer image 
data from an SD memory card (not provided) to a computer.

NOTE: You can transfer image data to your computer only if the computer is running the 
Microsoft® Windows® 2000 (SP4 or later), Windows XP (SP2 or later), or Windows Vista® 
operating system.

Remove the memory card before you turn off the document camera.

Do not remove an SD memory card from the document camera unless the 
connected projector or display shows the camera image.

For best results, use a USB 2.0 compliant cable.