Lorex Technology SHS-4QM Series Folheto
SHS-4QM SERIES
Quick Set-Up Guide
R1
The SHS System comes with the following components:
• Quad Processor
• 2 x Weatherproof Color Cameras with Stands
• 2 x Weatherproof Color Day/Night IR Cameras with Stands
• 4 x 60’ DIN Extension Cables
• DIN Video Cable
• Remote Control
• Power Adapter
• Quad Processor
• 2 x Weatherproof Color Cameras with Stands
• 2 x Weatherproof Color Day/Night IR Cameras with Stands
• 4 x 60’ DIN Extension Cables
• DIN Video Cable
• Remote Control
• Power Adapter
Getting Started
Quad Surveillance SyStem
with 4 ccd indoor/outdoor cameraS*
Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cables
* IR illumination range up to 16 ft. (5M) under ideal conditions. Objects at or beyond this range may be partially or completely obscured,
depending on the camera application. Picture changes from Color to B&W under low light conditions.
* Note that the IR Night Vision Cameras have a black lens cover.
depending on the camera application. Picture changes from Color to B&W under low light conditions.
* Note that the IR Night Vision Cameras have a black lens cover.
A.
Connect Cameras
Check your package to confirm that you have received the
complete system, including all components shown above.
Connect the female end of the supplied 60’
extension’ cable to the camera.
1
NOTE: Confirm that the arrows
on the DIN Camera Cable and the
DIN Extension cable are aligned
when connecting the cable. If the
pins in the DIN Cable are bent, the
Camera will NOT function.
Connect the male end of the supplied 60’
extension cable to an open DIN channel on
the back of the Quad Processor. Continue
connecting additional DIN cameras.
2
NOTE: The arrow on
the DIN Connector
Connector should
be facing up when
connecting it to the
Quad Processor.
Connect the DIN end of the Video Cable to the Quad Processor. Connect the RCA VIdeo cable
to the TV, VCR or Monitor.
to the TV, VCR or Monitor.
B.
Connecting the DIN Video Cable
Connectivity Diagram
TV / VCR / MONITOR
Connect the Yellow RCA
connector to the TV Video IN
Port (yellow)
QUAD PROCESSOR
Connect the DIN Cable end
to the Video Output port
SHS CABLE
RCA to DIN Cable
TV / VCR / MONITOR
4 x CAMERAS
POWER ADAPTER
DIN CABLE
QUAD PROCESSOR
ShS-4Qm
SerieS
QuicK Set
-uP Guide
www.lorexcctv.com
Night Vision
Cameras
Day Use
Cameras
4 x 60’ EXTENSION CABLES
SteP 1
Skill Level
Intermediate
easy
advanced
Time
under 30 minutes
under 15 minutes
under 60 minutes
Hand Tools
Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutes
under 15 minutes
under 60 minutes
Hand Tools
Hardware
Router
Hi Speed
over 60 minutes
time
tools
Skills - easy
Under 10 Min
utes*
Hand Tools
Plug & Play connectors, On
screen set up
* Installation time may vary based
on application and camera cabling