Toshiba IK-WD01A Manual Do Utilizador
47
Installation
Appendix
Introduction
How to Use
Defi
nitions in
Confi
guration
Event
A maximum of three events can be registered.
“Event name” Unique name for the event.
“Enable this event” Check to enable this event.
“Priority” The event with highest priority will be executed fi rst.
“Delay second(s) before detecting next event” Delay, in seconds, to check the
“Enable this event” Check to enable this event.
“Priority” The event with highest priority will be executed fi rst.
“Delay second(s) before detecting next event” Delay, in seconds, to check the
next event setting. This setting is used in motion detection and digital input trigger
type.
And the four kinds of trigger are supported.
type.
And the four kinds of trigger are supported.
“Video motion detection” Select the windows which need to be monitored.
“Periodically” The event is triggered in minutes at specifi ed intervals.
“Digital input” To monitor digital input.
“System boot” The event is triggered when the system boots up. The weekly and
“Periodically” The event is triggered in minutes at specifi ed intervals.
“Digital input” To monitor digital input.
“System boot” The event is triggered when the system boots up. The weekly and
time schedules are provided.
“Sun”∼“Sat” Select the days of the week to perform the event.
“Time” show “Always” or input the time interval.
“Time” show “Always” or input the time interval.
The default action is triggered digital output. If there are servers confi gured, the
user can select them from “Server name”, too.
user can select them from “Server name”, too.
“Trigger digital output” Check it to trigger digital output for specific seconds
when event is triggered.