Lorex Technology LBC5451 Manual Do Utilizador
Loosen the screws on both sides of the
camera module and twist to adjust the
sensor position.
camera module and twist to adjust the
sensor position.
The camera module can only
twist one full rotation in
either direction. Do not force
the lens, as this can break the
camera.
twist one full rotation in
either direction. Do not force
the lens, as this can break the
camera.
Do not over-tighten the
screws, as this may crack
the camera or base.
screws, as this may crack
the camera or base.
Make sure that the sensor is directly
below the camera lens (in the 6 o‘clock
position). Otherwise, the image will
appear rotated.
below the camera lens (in the 6 o‘clock
position). Otherwise, the image will
appear rotated.
Correct sensor
position
position
Camera module
screws
screws
11
Positioning