Lorex Technology lh1 10 Manual Do Utilizador

110

Appendix F: Assigning A Static IP To Your DVR

It is recommended to set the static IP address below the scope of your router. For example, if the 
router assigns an address ending between 100-254, choose an address ending between 2-99. 

 
Step 2 of 2: Enter the desired static IP address in the router

• Obtain the DVR’s MAC address 

To enter a static IP into the router:

1. Under the main menu, click on LAN & DHCP Server.
2. Configure the following: 

• Static DHCP: Select Enabled and then click Apply.
• Name: Enter the desired name of your device
• IP Address: Enter the IP address that you wish to make static. This IP address must be the 

same address specified in the DVR.

• MAC Address: Enter the MAC address of your DVR. 

3. Click Add.

• The DVR info appears in the Static DHCP list.

Once the DVR has been added to the Static DHCP list, you have successfully created a static IP 
address for your system.

Select Enabled

Add

Enter DVR name, IP 
address and  
Mac address