Toshiba IK-HD3D Manual Do Utilizador

A camera head needs to be connected to this camera control unit from this section on.
/  Refer to the item “5. CONNECTION”, connect the equipment correctly.
0  Turn on the connected equipment and the camera.
1   When using the camera for the first time and when replacing the camera head, be sure to perform the ABB 

adjustment, refer to the item “6.1 Automatic Black Balance”.

2  Aim the lens at the object, adjust the lens iris adjustment, focus adjustment, etc.
3  Refer to the item “6.2 White Balance”, make the adjustment.
4

necessary items. 

Black balance adjustment is necessary to get the correct black picture level.
s

disable the color bar pattern or the character display.

s

approx. 1 second.

Automatic black balance adjustment finished correctly.

Automatic black balance adjustment cannot be performed because the lens iris is open. Close 
the lens iris. 

Automatic black balance adjustment cannot be performed.
Operate the automatic black balance again. 

For white balance adjustment of this unit, AWB (Automatic White Balance) and MANUAL (Manual white balance) 
ADJUSTMENTS

Adjust white balance by displaying a white object 
inside the area set by AWB menu and holding the 
;$!4!

Adjust the white balance manually using the WHT 
BAL menu while shooting a white object.

Features  Automatically adjusts red and blue balance based 

on green for the object in the designated area .

White balance can be set manually.

When no white object exits in the designated area 
or lighting is too blight or too dark, AWB NG is 
displayed and automatic white balance adjustment 
can not be performed.

Adjustment is performed by confirming with a 
monitor etc.