Lucent Technologies Release 7 Manual Do Utilizador

Issue 4

June 1999

Maintenance Commands 

8-150

list suspend-alm-orig 

This command lists all events that have meaning to the Property Management 
System (PMS) that have occurred while the link between the switch and the PMS 
was down. For example, any room status codes entered by hotel housekeeping 
staff during a time of PMS outage would be shown in this report.

The following example shows a typical result when list pms-down is entered.

This command lists entries in the Suspend Alarm Origination table.

start-time

The starting time in 24-hour notation from which events are to be listed.

stop-time

The time in 24-hour notation up to which events are to be listed.

Extension

The extension associated with the reported event.

Event

The PMS event that was reported to the switch, but which could not be 
sent to the PMS.

Reason

The reason that the event could not be reported by the switch to the PMS.

Time

The time at which the event was reported.

 
 list pms-down    
 
                 PROPERTY MANAGEMENT SYSTEM ACTIVITY
 
 Extension    Event                Reason                 Time       
 
  402     from room, code 1    PMS link out of service    7:00am       
  405     from stn, code 1     PMS link out of service    9:00am
  411     check in, complete   PMS link out of service    9:30am
  411     PBX enabled MWL      PMS link out of service   12:00am
  450     from room, code 1    PMS reject                12:05am