Canon C1004RN Folheto

C1004RN (1/09)

Page 1 of 2

Integral Digital Sentry

®

 digital video management systems (DVMS) support certain 

Canon

®

 IP camera models. The camera models listed in this document can be used 

with Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s table for 

information about the hardware and software features validated for use on a Digital 

Sentry system. Any general limitations or special instructions are listed at the beginning 

of the document, and any model-specific information is listed after each table. For 

information about the general usage of each camera, refer to the camera manufacturer’s 

documentation.

To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer 

.

NOTES: 
• To view live video on the camera’s Web page, you must install Java

™

™

 toolbar.) When the installation is 

complete, refresh the live view on the Web page.

• Quality settings in DSAdmin do not work with this camera.
• Presets, iris, and focus functionality will be supported by Digital Sentry in a future 

release.

Firmware

1.2 Revision 68

Supported Resolutions

640 x 480, 320 x 240, 160 x 120

Frames per Second (FPS)

1 to 30

Number of Quality Settings

Not applicable

Supported Codec

MJPEG

Supported Motion Detection Integral
Pan/Tilt/Zoom (PTZ)

Yes (refer to NOTES)

Release Notes