Canon VB101 Manual Do Utilizador

■Glimpse

Yes

This parameter specifies the comment text string displayed as an overlay on the 

applet. If this parameter is omitted, no comment is displayed.

Yes

This parameter specifies the host name displayed in the applet. This value is used as the host name 

in messages displayed during connection, etc. If this parameter is omitted, no host name is displayed.

Yes

This function displays the frame count as an overlay on the video image. Specify "on" or "off". The default value is "off".

Yes

This function displays the host name as an overlay on the video image. Specify "on" or "off". The 

default value is "off". Note that this parameter is only valid if the "hostname" parameter is specified.

Yes

This parameter specifies the interval (in milliseconds) at which the screen is updated. If 

this parameter is omitted, the screen is updated at 5-second intervals. Because the 

Glimpse applet is designed to be used for displaying multiple sites as a list, this 

parameter is provided as a means of reducing the processing load. Intervals between 0 

and 300,000 ms (5 minutes) can be set. If 0 is specified, the interval is not adjusted.

Yes

Specifies whether or not connection to the camera server should be established 

simultaneously with applet startup. Specify either "on" or "off". When "on", a connection 

is established simultaneously with applet startup; when "off", no connection is 

established when the applet starts up and the character string specified for 

no_connect_msg is displayed. The connect() method is called up in order to make 

connections.

No

Specify the URL of the HTTP server for applet access. Specify the IP address and 

port number that match those specified in the codebase attribute.

Yes

Specifies the character string to be displayed while a connection to the camera 

server is being established. The default is "now connecting".

Yes

Specifies the character string to be displayed when a connection to the camera 

server is disconnected. The default is "disconnected".

Yes

Specifies the character string to be displayed when an attempt to connect to the camera 

server has failed. The default is "can't connect".

Yes

Specifies the character string to be displayed after the applet starts up, if "off" is 

specified for auto_connect. The default is "no connection".

Yes

Specifies the font size for connect_msg, disconnect_msg, error_msg, and 

no_connect_msg, when these messages are displayed. The default is to depend on 

the display area.