Axis Communications M3011 Manual Do Utilizador

This is used to compensate for the different colors present in different light sources, to make the colors in the image appear 
the same. The AXIS M3011 can be set to automatically identify the light source and compensate for its color. Alternatively, 
the type of light source can be manually selected from the drop-down list. Please see the online help files 

 for a 

description of each available setting.

Configure the exposure settings to suit the image quality requirements in relation to lighting, frame rate and bandwidth 
considerations.

Exposure value - Increasing the exposure will improve image quality at the expense of the total frame rate. There may also 

be an increase in motion blur. 

Exposure control - This setting is used to adapt to the amount/type of light being used. Allow slow shutter can be 

enabled/disabled when the exposure control is set to Automatic.

Enable Backlight compensation - Backlight compensation makes the subject appear clearer when the image background is 

too bright, or the subject too dark.

Exposure zones - This setting determines which part of the image is used to calculate the exposure.
Exposure priority  - This defines the balance between image quality and the frame rate. When Motion is prioritized, motion 

blur is minimized, but the image quality may be reduced with a higher frame rate. A prioritized Low noise will provide 
better image quality with a lower frame rate.

Click 

View to view the video stream with the current configuration. Once satisfied, click Save.

An overlay image is a static image superimposed over the video image. An overlay can be used to provide extra information, or 
to mask a part of the video image.

To use an overlay image in the AXIS M3011 Network Camera, it must be selected from the drop-down list of available images. 
The overlay (a logo, for example) is then displayed in the video image.

To use your own image, first upload it to the AXIS M3011 Network Camera. To upload enter the name of the file in the field 
provided, or click the Browse button, locate and click the Upload button.

Image Overlay Placement - To place the overlay image at specific coordinates in the live view image, check Include overlay 
image at the coordinates and enter the X and Y coordinates.

Click 

View to view the overlay image in the video stream. Once satisfied, click Save. 

Privacy masks are up to three configurable areas of solid color that allow concealment of parts of the image that are not to be 
viewable. Privacy masks cannot even be bypassed via the VAPIX® Application Programming Interface (API). 

The 

Privacy Mask List shows all the masks that are currently configured in AXIS M3011 Network Camera and indicates if they 

are enabled. To define a new mask: 

1. Click 

Add. A rectangle appears on the image.

1. Place the rectangle over the desired area to conceal.
2. To resize, click and pull the bottom right-hand corner.
3. Choose a color, black, white, gray or red for the box from the 

Privacy mask color drop-down list.

4. Enter a descriptive name in the 

Mask name field. 

5. Click 

Save. 

To edit a privacy mask, select it and reshape, move or change color as needed. Refer to the online Help 

 for more 

information.