Axis Communications M3011 Manual Do Utilizador

A 

Scheduled event can be activated at preset times, in a repeating pattern on selected weekdays.

1. Click 

Add scheduled... on the Event Types page.

2. Enter a descriptive 

Name for the event, such as Scheduled e-mail upload.

3. Set the 

Priority (High, Normal or Low).

4. Set the 

Activation Time parameters (24h clock) for the event - start on Sundays at 13.00 with a duration of 12 hours.

5. Set the 

When Activated... parameters, (what the camera would do at the specified time) for example, send uploaded 

images to an e-mail address.

6. Click 

OK to save the Event in the Event Types list.

 
Please see the online help 

 for descriptions of each available option.

The camera tampering application generates an alarm whenever the camera is repositioned, or when the lens is covered, 
sprayed, or severely defocused.

First, you must create an event, see How to set up a triggered event, on page 20, for the camera to send an alarm.

The 

Minimum duration parameter sets the minimum tampering period, that is an alarm will not be triggered until this period 

has lapsed, even if the tampering conditions are otherwise met. This can help prevent false alarms for known conditions that 
affect the image. 

If the camera lens is sprayed or covered so that the camera live view becomes dark, it will not be possible to distinguish this 
situation from other situations where the same effect is seen, such as when lighting conditions change.

When the 

Alarm for dark images parameter is enabled, alarms are generated for all cases where the lights are either dimmed 

or turned off, or if the lens is sprayed, covered, or rendered severely out of focus. If not enabled, no alarm will be sent. 

After you define these settings, click 

Save.