Axis Communications M1104 Manual Do Utilizador
AXIS M11 Series
Page 5
EN
GL
IS
H
LED indicators
Install the hardware
Important!
AXIS M11 Series is designed for indoor and outdoor use. To use the
camera outdoors, install in an approved outdoor housing. Please see
www.axis.com for more information on outdoor housings.
camera outdoors, install in an approved outdoor housing. Please see
www.axis.com for more information on outdoor housings.
1. Attach the stand to the camera by screwing it on. For wall
mounting, attach the stand to wall first, using 3 appropriate screws.
2. Attach the cable to the network connector (supports PoE class 1) in
the camera.
3. Check that the indicator LEDs indicate the correct conditions. See
table above.
LED
Color
Indication
Network
Green
Steady for connection to a 100 Mbit/s network. Flashes
for network activity.
Amber
Steady for connection to 10 Mbit/s network. Flashes for
network activity.
Unlit
No network connection.
Status
Green
Steady green for normal operation.
Note: Configure the Status LED to be unlit during normal
operation, or to flash only when the camera is accessed
operation, or to flash only when the camera is accessed
from
Setup > System Options > LED. See the online help
files for more information.
Amber
Steady during startup, reset to factory default or when
restoring settings.
Red
Slow flash for failed upgrade.
Power
Green
Normal operation.
Amber
Flashes green/amber during firmware upgrade.