Avaya R300 Manual Do Utilizador
DEFINITY Enterprise Communication Server Release 9
Getting Started with the Avaya R300 Remote Office Communicator
Getting Started with the Avaya R300 Remote Office Communicator
Issue 1
November 2000
Avaya R300 Administration
74
Configure Avaya R300 T1 lines (PSTN)
5
3. Check the Date and Time fields and correct them, as needed.
4. Press the Left Arrow key to exit the Sys Config profile.
A confirmation menu appears.
5. Press 2 to save your changes.
6. Press the Left Arrow key twice to return to the Main Edit Menu.
Configure Avaya R300 T1 lines (PSTN)
To configure the T1 slot, you must set the parameters that specify the lines’ connection to
the Central Office switch.
the Central Office switch.
For the T1 slot configuration, you open the Factory profile to the slot’s Line 1 profile, and
specify signaling mode, framing type, encoding, channel service unit (CSU) usage, cable
length, line attenuation, and channel usage. If you are using inband signaling, you need to
configure incoming call routing. If you want to use dynamic IP addressing, you need to
configure the address pool characteristics.
specify signaling mode, framing type, encoding, channel service unit (CSU) usage, cable
length, line attenuation, and channel usage. If you are using inband signaling, you need to
configure incoming call routing. If you want to use dynamic IP addressing, you need to
configure the address pool characteristics.
Specifying and configuring signaling mode
To specify the signaling mode, open the Net/T1 > Line Config > Factory profile > Line 1
profile for the line.
profile for the line.
Set the Sig Mode parameter to specify the type of signaling to be used on the T1 line:
ISDN, ISDN_NFAS, or Inband.
ISDN, ISDN_NFAS, or Inband.
|-------- MAX EDIT ------------ |--------------------| |--------------------|
|EXIT?
?? | |10-100 1234567890 ??| |30-000 Line Stat
|
|>0=ESC (Don’t exit)
| | L1/RA nnnnnnnnnn | |
123456789012 A
|
| 1=Exit and discard
| | 12345678901234 | | ---..........-
|
| 2=Exit and accept
| | nnnnnnnnnnnnnn | | .............-
|
|
| |--------------------| |--------------------|
|
| |10-200 1234567890 ??| |00-200 15:10:34
??|
|
| | L2/DS @@@@@@@@@@@
| |>M31 Line Ch |
|
| |
12345678901234
| | Ethernet up
|
|
| | @@@@@@@@@@@@@@
| |
|
|
| |--------------------| |--------------------|
|
| |40-300 WAN Stat
??| |40-400 Ether Stat ??|
|
| |>Rx Pkt:
118^| |>Rx Pkt:
3486092|
|
| | Tx Pkt:
511 | | Tx Pkt:
10056|
|
| |
CRC:
0v| | Col:
3530|
|
| |--------------------| |--------------------|
|
| |00-100 Sys Option | |40-100 Sessions
??|
|
| |>Security Prof: 1 ^| |>
0 Active
|
|
| | Software +8.0.0+ | |
|
|
| | S/N: 9320027
v| |
|
Press Ctrl-n to move cursor to the next menu item. Press return to select it.
Press Tab to move to another window --- thick border indicates active window.