Petsafe PIG00-10777 Manual Do Utilizador

6 1-800-732-2677

 

www.petsafe.net 7 

Place the Fence Transmitter:

•  In a dry, well ventilated, protected area (1A, 1B).
•  In an area where temperatures do not fall below freezing (e.g., garage, basement, shed, closet).
•  Secured to a stationary surface using the mounting hardware. A mounting template is included in the back of this 

guide.

•  At least 3 feet from large metal objects or appliances as these items may interfere with the signal consistency (1C).
To mount the Fence Transmitter, screw the mounting bracket onto a stationary surface such as a wall, and slide the 

Fence Transmitter onto the bracket. Once you have mounted the Fence Transmitter, the Boundary Wire must exit the 

building. This can be accomplished via a window or through a hole drilled through the wall. Ensure the drill path is 

clear of any utilities. Make sure the Boundary Wire is not cut off or pinched by a window, door, or garage door, as this 

can damage it over time.
To prevent fires and electrical hazards, install the Fence Transmitter in buildings that are in accordance with state and 

local electrical codes.

3ft.

1