TEAC LP-P1000 Manual Do Utilizador
52
Preset tuning (2)
Wakeup timer (1)
At the set time, sound will be output from the speakers.
o
Adjust the clock before setting the timer (page 25).
Setting the timer
1
Put the unit into standby (power off).
The unit must be in standby to set the timer.
If the ring around the STANDBY/ON button is lit
blue, the unit is on. Press the STANDBY/ON button
to put the unit into standby.
If the ring around the STANDBY/ON button is lit
blue, the unit is on. Press the STANDBY/ON button
to put the unit into standby.
2
Press and hold the TIMER button for at
least two seconds.
least two seconds.
Press and hold for at
least 2 seconds
The timer indicator ( ) blinks and “SET TIMER”
scrolls across the display once. “ON TIME” appears
and then the time input mode becomes active.
scrolls across the display once. “ON TIME” appears
and then the time input mode becomes active.
Display example
c
c
When using the remote control
The preset number appears on the left side of the
display.
display.
Example when preset 3 is selected
Preset number
o
When a preset station is selected, the MEMORY
indicator appears.
indicator appears.
o
After selecting a preset, this number will con-
tinue to be shown unless you select another
station manually.
tinue to be shown unless you select another
station manually.