Alpine IVA-D310 Manual Do Utilizador
42
-EN
01GB06IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
Recalling the Stored Adjusting Contents
Following operation is performed after Step 3 above.
4 Touch any one of [P.SET 1] to [P.SET 6] on the BASS
ENGINE screen.
The stored adjusting contents will be recalled.
The stored adjusting contents will be recalled.
Subwoofer On and Off
Setting item: SUBWOOFER
Setting contents: OFF / 0° / 180°
Setting contents: OFF / 0° / 180°
• The setting of “Subwoofer On and Off” can be stored in the preset
buttons (1 through 6).
Visual EQ Setting Operation
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [i-Personalize].
The i-Personalize setup screen appears.
3
Touch [
] of VISUAL EQ.
VISUAL EQ screen appears.
4
Select a desired setting item by touching [
] or [
].
Setting items:
VISUAL EQ*
BRIGHT
COLOR*
TINT*
CONTRAST
SHARP*
USER
MEMORY*
* The setting is available in the visual source mode. (except navigation
screen)
5
Change the setting on the selected item by touching
its [
its [
] or [
].
6
Touch [RETURN] to return to the previous screen.
Touch [CONTROL] to return to the main source screen that
was displayed before the setup operation was started.
was displayed before the setup operation was started.
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
“CUSTOM” is displayed.
Setting item: BRIGHT
Setting content: -15 ~ +15
Setting content: -15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
• When any NIGHT M. to CONTRAST setting item is selected, the
brightness is automatically adjusted according to the car's interior
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 35).
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 35).
Setting item: COLOR
Setting content: -15 ~ +15
Setting content: -15 ~ +15
You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
• Color adjustment can be made only in the navigation, DVD, Video
CD, AUX1 and AUX2 modes.
• Color adjustment cannot be made if a Navigation system with the
RGB feature is connected.
Setting item: TINT
Setting content: G15 ~ R15
Setting content: G15 ~ R15
Adjust the color from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each color.
displayed at the maximum of each color.
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX1 and AUX2 modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
Setting item: CONTRAST
Setting content: -15 to +15
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. “HIGH”
and “LOW” appear as the maximum and minimum values
specified.
and “LOW” appear as the maximum and minimum values
specified.
• When any NIGHT M. to CONTRAST setting item is selected, image
contrast is automatically adjusted according to the car's interior
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 35).
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 35).
OFF: Subwoofer output is off.
0°:
Subwoofer output is on, and the phase is 0°.
180°: Subwoofer output is on, and the phase is 180°.
VISUAL EQ™
The following steps 1 to 6 are common operations to each
“Setting item” of VISUAL EQ setting. Refer to each section for
details
“Setting item” of VISUAL EQ setting. Refer to each section for
details
Selecting the VISUAL EQ Mode (Maker’s
setting)
setting)
OFF (FLAT): Initial Setting
NIGHT M.:
Suitable for movies in which dark scenes
frequently appear.
frequently appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not
clearly shown.
clearly shown.
CONTRAST: Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 43).
preset No.P-1 from “Storing VISUAL EQ”
(page 43).
P-2:
Recalls the VISUAL EQ mode being saved on
preset No.P-2 from “Storing VISUAL EQ”
(page 43).
preset No.P-2 from “Storing VISUAL EQ”
(page 43).
Adjusting Brightness
Adjusting Color of Picture
Adjusting Tint of Picture
Adjusting Image Contrast
01GB00IVAD310.book Page 42 Wednesday, December 1, 2004 4:20 AM