Panasonic BT-LH2170E Manual Do Utilizador

48

49

Underlined values indicate factory defaults.

LOCAL

REMOTE

Selects operation. (with control lock)

[LOCAL]      Front panel operation is enabled (including controls that use the GPI 

function)

[REMOTE]   Remote operation enabled (controls using RS-232C or RS-485. Front 

panel operation is locked) 

• Power On/Off, VOLUME operations, GPI control and menu dis-

play are available when the lock is engaged.

• Only [CONTROL]/[LOCAL ENABLE] menu items are available 

when the lock is engaged.

• The rotary knob <PICTURE> cannot be used to change set val-

ues when the lock is engaged.

• The [LOCAL ENABLE] setting determines operations in lock 

mode.

• The 

 mark appears in the operation status display, menu 

display  ([MAIN MENU] (main menu), [FUNCTION] menu, [IN-

PUT SELECT] menu), [PICTURE] (picture adjusting) menu, and 

FUNCTION display screens when the lock is engaged.

MENU EXIT

RETURN

RETURN

SEL.

ENTER

[MARKER]

 MARKER

  16:9

  4:3

  BACK

  CENTER

  CROSS

  COLOR

 GPI MARKER1

 GPI MARKER2

OFF

4:3

OFF

NORMAL

OFF

OFF

WHITE

95%(16:9)

95%(16:9)

Mark

*

DISABLE

INPUT

FUNCTION

INPUT+FUNC.

Selects whether to enable or disable <INPUT SELECT> and <FUNCTION> 

button operations when [REMOTE] is selected under [CONTROL].

[DISABLE]         Disables <INPUT SELECT> and <FUNCTION> button 

operations.

[INPUT]             Enables <INPUT SELECT> button operations.

[FUNCTION]     Enables <FUNCTION> button operations.

[INPUT+FUNC.]  Enables <INPUT SELECT> and <FUNCTION> button 

operations.

*

V3.1

V4.0

Selects version of the TSL protocol.

0 to 126

(Factory default 

setting: 0)

Sets the monitor ID number to use RS-485 communication.

OFF

ON

Select RS-485 interface command format (→page 63).

[OFF] STX and ETX need not be placed.

[ON]  STX and ETX must be placed.

*

1

 

Only available when [REMOTE] is selected under [CONTROL].

*

2

 

The monitor supports version 3.1 and 4.0 of the TSL UMD PROTOCOL provided by Television System LTD.

xxxxxxh 

*

1

Displays the total number of hours it has been on.

xxxxxxh 

*

1

Displays the number of hours that the backlight has been on.

*

1

 

“xxxxxx” indicates up to 262800 hours (about 30 years). [OVER] is indicated when the number of hours is 262800 or higher.