Panasonic BT-LH2170E Manual Do Utilizador

52

53

This function overlays and displays the SDI1 (L) image and SDI2 (R) image on a checkerboard pattern in one screen to enable you to 

check the brightness offset and color differences

MENU EXIT

RETURN

RETURN

[3D ASSIST]
 COLOR
 SIZE      256

Overlay L/R on one screen.

When it is easy to see the borderline of the checkerboard pat-

tern, the brightness or color of L/R images is offset.

Underlined values indicate factory defaults.

128

256

Selects the checkerboard grid size when overlaying the SDI1 (L) side and SDI2 

(R) side images.

[128]  The checkerboard grid consists of squares of 128 samples and 128 lines.

[256]  The checkerboard grid consists of squares of 256 samples and 256 lines.

This function enlarges part of an image to enable you to check left and right focus offset and zoom offset.

MENU EXIT

RETURN

RETURN

[3D ASSIST]
 ZOOM FOCUS
 ZOOM      OFF
 F-IN-R    OFF
 LEVEL      30

The L/R 2 screens are shown side-by-side.

Expanding the parts that are not in focus makes it easy to check 

the focus of the left and right cameras.

Underlined values indicate factory defaults.

OFF

C

L

R

Selects image enlargement and the signal display position of the enlarged image 

(PIXEL TO PIXEL).

[OFF]   Displays two screens side-by-side

[C]       Center of screen

[L]       Left of screen

[R]       Right of screen

OFF

ON

Turns OFF/ON the FOCUS-IN-RED function in the displayed screen.

[OFF]   Turns the function off.

[ON]    Turns the function on

1 to 30

(Factory default setting: 15)

Adjusts  the  detection  sensitivity  of  FOCUS-IN-RED.  (The  numerical  value  turns 

green when sensitivity adjustment can be made.)

A higher numerical value results in lower detection sensitivity (lack of sharpness).

[1] to [30]  Common left and right detection level