Panasonic BT-LH900A Manual Do Utilizador

8

The video signals are output from this connector.  Signals
are passed through the : VIDEO IN connector and
output from this connector.

;

< SDI input connectors

The SDI input signals are supplied to these connectors
which support automatic HD/SD switching.

= SDI output connector

The SDI signals are output from this connector.  It is the
switched output of the < SDI input connectors.
The signals displayed on the screen, whether they are the
ones supplied to the SDI 1 connector or SDI 2 connector,
are output.
However, the switched output signals are not output when
the component or video input signals have been selected.
When multiple monitors are connected in a 

∗daisy chain

pattern using the SDI active through-out, flicker or noise
may occur on the screen, depending on the quality of the
original signal, lengh of cables or the number of monitors
connected. 
∗ Daisy chain connection:

This is a connection method for distributing a signal to
two or more devices by connecting the through-output
terminal of the first device to an input terminal of the
second device, the through-output terminal of the
second device to an input terminal of the third device,
and so on.

? DC IN socket

The external DC power source is connected here.  When
a DC power supply is connected concurrently with the
battery, the external power input takes precedence.

A Light control switch 

This is not used on this monitor.

@ Tripod fastening screws

Two screws (UNC3/8-16 compatible) for securing a tripod
are provided each on the top of the monitor and at its
bottom where the main controls are removed.
A removable screw spacer is provided in one of the screw
holes in the bottom of the monitor, and this supports a
UNC1/4-20 screw.  To secure the tripod, use the hole that
fits the diameter of the fastening screw on the tripod.

> POWER switch

This is the power switch.

8 GPI connector

When GPI signals are connected here, external
operations can be performed.

9 RS-232C connector

External operations can be performed under the RS-232C
standard.

: VIDEO IN connector

The video input signals are supplied to this connector.

6

7

8

9

:

;

<

=

>

?

5

@

@ A

6 Analog component/RGBS connectors

These are the BNC input connectors for the analog
component (YP

B

P

R

) or RGBS signals.  When RGB

signals are supplied, external sync (gen-lock) can also be
used.

5 Battery holder

This holder is used with a battery made by Anton/Bauer.

7 CONTROL connector

The cable from the main controls is connected here.
<Note>
The monitor is shipped with the cable disconnected from
the connector.  Prior to use, therefore, check out the
shape of the cable connector and plug it properly into this
connector.