ONKYO DR-UN7 Manual Do Utilizador
47
Listening to the Radio
—Continued
Positioning the XM Antenna
You can check the signal strength of the XM radio signal
and adjust the position of the XM antenna accordingly.
and adjust the position of the XM antenna accordingly.
Note:
If the signal level is 0%, make sure that the XM antenna
is connected properly.
If the signal level is 0%, make sure that the XM antenna
is connected properly.
XM Radio Messages
The following messages may appear while using XM
radio.
radio.
The XM antenna is not connected properly. Check the
antenna.
antenna.
The XM user encryption code is being updated. Please
wait.
wait.
The signal is too weak. Check the antenna connection
and reposition it for the best reception.
and reposition it for the best reception.
The DVD receiver is tuning or decoding audio or text
data. Please wait.
data. Please wait.
The XM channel you selected is not currently broadcast-
ing. Select another channel.
ing. Select another channel.
1
Press EDIT/NO/CLEAR with XM
redio selected.
redio selected.
2
Turn MULTI JOG to select
“Antenna Aim ?” and then press
MULTI JOG.
“Antenna Aim ?” and then press
MULTI JOG.
3
Adjust the position of the XM
antenna so that the signal
strength is at least 70%.
antenna so that the signal
strength is at least 70%.
The signal level range is 0% to 100%.
1
2