ONKYO DR-UN7 Manual Do Utilizador

67

To reprogram the timers, press EDIT/NO/CLEAR and follow the procedure from the beginning.

You can also use the number buttons on the remote controller.
When the desired time is displayed, press MULTI JOG.

For example, to set 7:29, press 10/0, 7, 2, then 9.

Notes:
• When you set the On time, the Off time is automatically set to one hour later.
• During timer recording, the first few seconds may not be recorded. Set the On time 

to one minute earlier.

When the desired time is displayed, press MULTI JOG.

The default value for the volume is 25. After selecting the desired volume, press 
MULTI JOG to confirm the current value.

Press STANDBY/ON to place the unit in Standby mode.

Notes:
• Even if you set Memory or Random mode for timer playback, the DVD receiver will 

perform normal playback at the timer On time.

• If the unit is not in Standby mode, the programmed timer operation will not start at 

the timer on time. Be sure to place the unit in Standby mode to activate timer oper-
ation.

• If you try to set the Sleep timer or press TIMER during timer operation, the current 

timer setting is cancelled.

• The volume level during the Timer Play operation is set to the level programmed 

prior to placing the unit in Standby mode. Adjust the volume level as necessary 
before placing the unit in Standby mode.

• During the Timer Rec operation, the muting function is activated and the audio level 

is minimized. To listen to the audio being recorded, press MUTING on the remote 
controller.

Timer setting indication

Selected 
timer 
number

A square appears if 
the Timer Rec opera-
tion is programmed.