Sharp LC-39LM652E/V Manual Do Utilizador

● 

 

● 

 

Current software version can be downloaded from 
the SHARP Internet site and installed on your TV 
using a USB memory.

● 

 

The software update wizard appears.

See page 27 for more information.

● 

 

The software update wizard appear.

•  The file system of USB memory must be FAT32.
•  The USB memory must have only one partition.
•  If in doubt, the USB memory should be formatted 

as "FAT32" without "extended attributes".

•  A broadband connection and Network setup are 

required to update the software using the internet.

● 

● 

You can select different settings which affect the on-
screen displays.

● 

 

You can adjust the duration of the display.

● 

 

You can set whether or not the change in the volume 
should be displayed visually on the screen.

● 

 

Here you can activate/deactivate the additional help 
in the screen while navigating the menu. 

● 

 

The time can be displayed permanently. It is always 
visible as long as no other display is activated.

● 

 Automatic HDMI-CEC hint

If this option is activated, a message about the 
adapted function of the remote control is shown 
whenever you switch over to an HDMI port position to 
which a HDMI-CEC compliant device is connected.

● 

Allows you to enter the time and date manually.

● 

 

Enter the time with the numeric buttons of the remote 
control.

● 

 

The current time at the Greenwich Meridian 0º is to be 
understood as world time. The time shift in relation to 
this time must be given in hours (with the ◄/► in the 
TV and OK button of the remote control).

● 

 

Enter the date with the numeric buttons of the remote 
control.

● 

 

Set it to yes if you want to activate automatically 
summer time.

● 

 

Enter the date on which the time is switched over 
to summer time if it deviates from the automatically 
calculated date.

● 

 

Enter the date on which the summer time ends if it 
deviates from the automatically calculated date.

● 

You can make general presettings for DVB stations.

● 

 

You can preset whether a subtitle is always to be 
displayed as soon as it is offered by the station. A 
special subtitle for impaired hearing can also be 
selected.

 

• Subtitles are not offered by all stations. Many 

stations only broadcast subtitles by teletext.

● 

 

Select the DVB character set so that the title of the 
broadcast of your favourite received station or the 
texts of your CI module are displayed correctly.

● 

 

You can activate a special sound for viewer with 
impaired vision.

● 

EPG is a programme list that is displayed on the screen. 
With the EPG, you can check the schedule of digital 
channels, view detailed information about it, tune to an 
event currently on-air and set a timer for future events.
Also recordings can be programmed.

● 

 

Here you can determine for which station in the 
programme guide information is to be displayed.

● 

 

Here you can switch the data entry for the electronic 
program guide (EPG) on or off.
If the data capture is switched on, your TV set tries 
to update the data base overnight or, if required, two 
minutes after switching to stand-by mode. The TV set 
must be on stand-by for this and not switched off at 
the mains switch.
The indicator on the TV set lights violet during data 
capture in stand-by mode.
The data is also updated while you are watching the 
EPG station.

● 

 

When yes is selected, the switched off TV switches 
on automatically in standby mode at the beginning 
of a memorised programme. A screen message 
appears when switching on. If this is not confirmed 
within 5 minutes with the OK button, the TV switches 
off again automatically for safety reasons.

● 

Is possible to adjust the USB REC to your requirements. 

● 

 

If an entry has been hidden in an archive recording 
(see page 52) you can be informed by a screen 
message when skipping a hidden area, by selecting 
yes

.