Sharp LC-39LM652E/V Manual Do Utilizador

E

Using the HDMI CEC protocol, you can interactively 
operate compatible system devices (AV amplifier, DVD 
player/recorder, Blu-ray player/recorder) using a single 
remote control unit.

•  HDMI CEC does not work while using USB REC functions.

E

 One touch play
When the TV is in standby mode, it will automatically 
turn on and play back the image from the HDMI 
source.

 Single remote control operation
HDMI CEC automatically recognises connected 
HDMI devices and you can control the TV and the 
devices as if using a universal remote control unit.

 Operating title list of external devices
In addition to displaying the TV’s own timer list (Page 
36), you can also call up the external player’s top 
menu or player’s / recorder’s title list provided that the 
devices support HDMI CEC.

NOTE
• 

When you use HDMI CEC, be sure to use a certified HDMI 
cable.

• 

Point the remote control unit towards the TV, not to the 
connected HDMI device.

• 

Video noise may occur depending on the type of HDMI 
cable used. Be sure to use a certified HDMI cable.

• 

Up to three HDMI recording devices, one AV amplifier and 
three players can be connected using this system.

• 

These operations affect the HDMI device selected as the 
current external source. If the device does not operate, turn 
on the device and select the appropriate external source 
using b.

• 

When you insert/remove HDMI cables or change 
connections, turn on all connected HDMI devices before 
turning on the TV. Confirm that picture and audio are 
correctly displayed/output by selecting “HDMI 1”, “HDMI 2”, 
“HDMI 3” or “HDMI 4” from the “AV selection” menu.

First connect the speaker system or a player/recorder 
that supports the HDMI CEC protocol.

NOTE
• 

Refer to the operation manual of the device to be connected 
for further details.

• 

After unplugging connection cables or changing the 
connection pattern, turn on the power of the TV after all the 
power of relevant devices has been turned on. Change the 
external input source by pressing b, select the appropriate 
external source and verify the audiovisual output.

• 

The cables illustrated in the following explanation are 
commercially available items.

HDMI-certified cable (commercially available)
RCA audio cable (commercially available)

 



HDMI-certified cable (commercially available)

Go to Menu

→Setup→Connections→HDMI CEC 

and select the menu you want to set.

Set to On to enable HDMI CEC functions.

If this is activated, the one touch play function is enabled. 
While the TV is in standby mode, it automatically turns 
on and plays back the image from the HDMI source.

•  The factory default for this item is “Off”.

When a device that supports HDMI CEC is connected, 
the R/C of TV does not work. 
By short pressing of SOURCE button the R/C will be 
operational again and TV goes to TV mode.
By long pressing of SOURCE button the TV return to 
HDMI-CEC mode.





