Diamond Systems DV173BP Manual Do Utilizador

 

 4

4

4

 

 

Hardware Installation 

Your monitor is equipped with an automatic power supply with a voltage range 
from 100 to 240 Volts AC at a frequency of 50 to 60 Hz. Make sure that your 
local power supply is within the supported range. If you are unsure, please 
contact your electricity supplier. 
 
To install your Diamond Digital DV173BP monitor: 

1.  Make sure that the power to the computer and the power to the monitor are 

both turned off.  

2.  Connect the blue connector of the monitor’s D-sub cable to the VGA output 

of the computer‘s graphics card.  

3.  Connect the stereo audio cable from the monitor’s audio jack to the audio 

output of your computer’s sound card. 

4.  Connect the power cord from the monitor’s power jack to an AC power 

socket. Please make sure, that you have easy access to the power socket 
so you can disconnect the unit from the power socket should you need to. 

 

 

1. 

Power cable

 

2. 

Video cable

 

3. 

Audio cable