Jonsered CS 2153 Manual Do Utilizador

English

 – 31

Grasp the chain saw firmly, wrapping your fingers and thumbs 
around the handles.

Apply full throttle and activate the chain brake by tilting your 
left wrist forward onto the front hand guard. Do not let go of 
the front handle. The chain should stop immediately.

•

Make sure the throttle control is locked at the idle setting 
when the throttle lockout is released.

•

Press the throttle lockout and make sure it returns to its 
original position when you release it.

•

Check that the throttle control and throttle lockout move 
freely and that the return springs work properly.

•

Start the chain saw and apply full throttle. Release the 
throttle control and check that the chain stops and 
remains stationary. If the chain rotates when the throttle 
control is in the idle position you should check the 
carburetor idle adjustment.

Check that the chain catcher is not damaged and is firmly 
attached to the body of the chain saw.

Check that the right hand guard is not damaged and that there 
are no visible defects, such as cracks.

Regularly check the vibration damping units for cracks or 
deformation.

Make sure the vibration damping units are securely attached 
to the engine unit and handle unit.

Start the engine and make sure the engine stops when you 
move the stop switch to the stop setting.