Shindaiwa 68232-94011 Manual Do Utilizador

48015

48017

EVERY 10/15 HOURS

EVERY 50 HOURS 

n

INSPECTION Inspect the entire 

blower and tubes for damage, 

including loose or missing compo-

nents, and repair as necessary.

n

SPARK PLUG Replace the spark 

plug with a Champion CJ8 or 

equivalent, gapped to 0.024 inch 

(0.6mm).

(more frequently if reduced  

performance is noted)

CAUTION!

Never allow dirt or debris to enter 

the cylinder bore! Before removing 

the spark plug, thoroughly clean 

the spark plug and cylinder head 

area!
Allow the engine to cool before 

servicing the spark plug! Cylinder 

threads can be damaged by tight-

ening or loosening the spark plug 

while the engine is hot!

  

FUEL FILTER Use a bent piece of 

wire to extract the fuel filter from in-

side the fuel tank, and then remove 

and replace with a new element. See 

figure 14.                                              

                                       

CAUTION!

                           
Do not nick or perforate fuel tube 

with wire hook!  

  Before reinstalling the filter, inspect 

the condition of the fuel line. If 

damage or deterioration are noted, 

the blower should be removed from 

service until it can be inspected by a 

Shindaiwa-trained service technician.

n

COOLING SYSTEM Use a wood 

or plastic scraper and a soft brush 

to remove dirt and debris from the 

cylinder fins and crankcase.

1.  Use the spark plug wrench to re-

move the spark plug (turn counter-

clockwise to remove).    See figure 

13.

2.  Clean and adjust the spark plug 

gap to 0.024” (0.6mm). Replace any 

damaged or visibly worn plug with a 

Champion CJ8 or equivalent.    See 

figure 13.

3.  Install the spark plug finger-tight 

in the cylinder head, then tighten it 

firmly with the spark plug wrench. 

Avoid overtightening.

48014

14