Servis-Rhino 2412 Manual Do Utilizador
OPERATION
2412 01/11
Operation Section 4-3
© 2011 Alamo Group Inc.
OPERA
T
ION
1.
Standard Equipment and Specifications
Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given
for a loader equipped with 84” material bucket operated with an average tractor hydraulic system of 25.8 GPM
with engine operating at 2300 RPM and control valve relief setting of 2750 PSI.
for a loader equipped with 84” material bucket operated with an average tractor hydraulic system of 25.8 GPM
with engine operating at 2300 RPM and control valve relief setting of 2750 PSI.
Horsepower Range
90-130 HP
System pressure/flow rate
2750 PSI/ 25.8 GPM
Lift Capacity to maximum height
3056 lbs.
Breakout force at pivot pin
8240 lbs.
Rollback force at ground line
7244 lbs.
Total weight with bucket (approx.)
2060 lbs.
Raising time to full height
5.36 seconds
Lower time
4.34 seconds
Attachment dump time
4 seconds
Attachment rollback time
3.56 seconds
Hydraulic system flow
25.8 GPM
System pressure at rated flow
2750 PSI
(A)
Maximum Clearance at Full Height
149.5”
(B)
Clearance with Bucket Dumped
117”
(C)
Reach at Maximum Height
39.69”
(D)
Maximum Dump Angle
50°
(E)
Reach with Attachment on Ground
89.5”
(F)
Attachment Rollback Angle
13°
(G)
Digging Depth
4”
(H)
Overall Height in Carry Position
80”
(Manufacturers estimated specifications and design subject to change without notice.)