Weed Eater G26LRV Manual Do Utilizador

PULL OUT ON STOP

BRACKET TO REMOVE

SUPPORT ASSEMBLY

TO REMOVE THE SUPPORT ASSEMBLY (See Fig. 2B)

1. Pull outward on the stop bracket enough to allow support

assembly to be lifted up and away from drawbar.

SHOULDER

BOLTS

SUPPORT

ASSEMBLY

REAR MOUNTING BRACKET

(See Fig. 2A and 2B)

NOTE: Your new drawbar already has four (4) shoulder bolts

installed. Simply hang the mounting bracket on the bolts.

REAR DRAWBAR

(See Fig. 1A, 1B)

Fig. 2A

Fig. 1A

Fig. 1B

Fig. 2B

1. Remove existing drawbar by removing four screws.

Insert flat screwdriver to remove bumper from engine

plate. Lift up and pull rearward.

2. Install new drawbar by replacing screws removed in

step 1.

ASSEMBLY

DRAWBAR

ENGINE PLATE