Snapper 1721303-01 Manual Do Utilizador

TRACTOR CONTROLS

Before you begin operating the tractor with the dozer
blade attachment, make certain you have:

• Read and understood the instructions in the

tractor Operator’s Manual.

• Become thoroughly familiar with all of the

tractor controls and their operation, including
how to safely and properly start and stop the
unit.

• Practice driving in an open area—without doz-

ing—to become accustomed to the unit.

Features

& Controls

A. Blade Angle Control Lever

The blade angle release lever controls a spring-loaded
plate which locks the blade in one of three positions.

Use an abrupt pushing/pulling motion to release the
angling mechanism and move the blade left or right.
Push the angling lever forward fully to lock the blade in
the left position. Pull the lever fully back to lock the
blade in the right position. Move the lever slowly past
center to lock in the centered position.
NOTE: It is easier to change the angle of the blade with
the attachment raised.

B. Attachment Lift

NOTE: Models with hydraulic or electric lift should refer
to the tractor operator’s manual for lift control informa-
tion.

The attachment lift lever raises and lowers the dozer
blade. See the tractor operator’s manual for control
information. See the Adjustments section for proper
attachment lift adjustment.

Please take a moment and
familiarize yourself with the
name, location, and function
of these controls so that you
will better understand the safe-
ty and operating instructions
provided in this manual.

Figure 1. Control Locations
A. Blade Angle Control Lever
B. Attachment Lift

CONTROL FUNCTIONS

The information below briefly describes the
function of individual controls. Operating the
tractor and dozer require the combined use of
these controls and additional controls whose
operation is described in the tractor Operator’s
Manual.